Mechanical, fire, and smoke behaviour of hybrid composites based on polyamide 6 with basalt/carbon fibres
- 28 May 2019
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 53 (28-30) , 3979-3991
Abstract
This paper describes the hybridization of basalt and carbon fibres in polyamide 6 by injection moulding method and the analyses of the mechanical, morphological, fire, and smoke properties of the obtained materials. The content of basalt/carbon fibres in hybrid composites amounted to 5/5 wt%, 7/7 wt%, and 10/10 wt%. The addition of fibres resulted in an increase in mechanical properties of the examined materials, was reflected by the threefold increase of Young modulus for the composites containing 10/10 wt% of fibres. To investigate the aging, the samples were stored in distilled water for 1, 7, 14, 100, and 210 days. After 210 days, a significant decrease in mechanical properties was observed. Interestingly, the addition of fibres caused a 50% reduction in stiffness, whereas, in the case of neat polyamide 6, the decrease was about 78%. Additionally, the addition of fibres reduced water sorption. With the increasing fibre load, the decrease in the maximum average rate of heat emission was observed. In the case of composites containing 10 wt% of basalt fibres and 10 wt% of carbon fibres, it amounted to 207 kW/m2 and was lower by approx. 37% in comparison to the unmodified polymer.Keywords
This publication has 29 references indexed in Scilit:
- Hybridization effect of basalt and carbon fibers on impact and flexural properties of phenolic compositesIranian Polymer Journal, 2014
- Mechanical, thermal expansion, and flammability properties of co-extruded wood polymer composites with basalt fiber reinforced shellsMaterials & Design (1980-2015), 2014
- The reinforcing effect of basalt fiber and polyamide-6 on the mechanical properties of polytetrafluoroethylene compositeJournal of Thermoplastic Composite Materials, 2013
- Flexural and impact behaviour of carbon/basalt fibers hybrid laminatesJournal of Composite Materials, 2013
- The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid compositesMaterials & Design (1980-2015), 2013
- Cone calorimetry studies of fire retardant soybean-oil-based copolymers containing silicon or boron: Comparison of additive and reactive approachesPolymer Degradation and Stability, 2010
- Influence of accelerated aging on clay-reinforced polyamide 6Polymer Degradation and Stability, 2009
- Absorption and diffusion of humidity in fiberglass‐reinforced polyamidePolymer Composites, 2005
- Mechanical Performance of Polyamides with Influence of Moisture and Temperature – Accurate Evaluation and Better Understanding2001
- Hybrid composites based on polyethylene and carbon fibres Part 3: Impact resistant structural composites through damage managementComposites, 1990