RFID Coverage Extension Using Microstrip-Patch Antenna Array [Wireless Corner]
Authors:
- 15 May 2009
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 51 (1) , 185-191
Abstract
In this paper, a UHF-band 2 times 2 microstrip phased-array antenna is designed and implemented to extend the coverage of an RFID reader system. The phased-array antenna has four microstrip-patch antennas, three Wilkinson power dividers, and a transmission-line phase shifter. These are printed on a dielectric substrate with a dielectric constant of 4.5. The array has dimensions of 34 cm times 45 cm, operating at a frequency of 867 MHz, as specified in RFID Gen2 protocol European standards. The phased-array antenna has a measured directivity of 12.1 dB, and the main-beam direction can be steered to angles of plusmn 40deg, with a HPBW of 90deg. The phased-array antenna is used as the receiving antenna in a commercial reader system. Experimental results indicate that the coverage of the RFID system with the phased-array antenna is superior to the coverage with a conventional broader-beamwidth microstrip-patch antenna. The proposed system can also be used for a wireless positioning system.Keywords
This publication has 7 references indexed in Scilit:
- Gains For RF Tags Using Multiple AntennasIEEE Transactions on Antennas and Propagation, 2008
- Read Range Performance Comparison of Compact Reader Antennas for a Handheld UHF RFID Reader2007
- Design Consideration of UHF RFID Tag for Increased Reading Range2006
- Design criteria for the RF section of UHF and microwave passive RFID transpondersIEEE Transactions on Microwave Theory and Techniques, 2005
- RFID Handbook2003
- Research on planar antennas and arrays: 'structures Rayonnantes'IEEE Antennas and Propagation Magazine, 1993
- A study of microstrip array antennas with the feed networkIEEE Transactions on Antennas and Propagation, 1989