Characterization of wind–dust pressure distribution in the near-wall region of a trough solar collector
- 1 November 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Abstract
Desert regions provide abundant solar irradiance and are thus attractive locations for utility-scale solar thermal plants; however, wind-driven dust loads generated by intense sandstorms pose a serious hazard to the safe operation of parabolic trough collectors (PTCs). Accordingly, investigating dust-mitigation design for PTCs under sandstorm conditions is essential. This study employs numerical simulation to assess how variations in installation tilt, wind-direction orientation, incoming wind speed, and dust volume fraction influence vortex characteristics and wind–dust pressure distributions around PTCs. The results show that, across the examined range of installation tilts, the drag and lift coefficients associated with wind–dust loads are relatively large, while dust-induced moment components in the X and Y directions remain comparatively small. Under oblique wind conditions, asymmetric pressure fields and convex conical vortices amplify overturning moments, with mean dust moments in the X and Y directions approximately 27 and 3 times greater than those under vertical wind, respectively. Further analysis indicates that variations in incoming wind speed and dust volume fraction induce wind–dust load fluctuations of only about 1%–5%. Therefore, dust-mitigation measures for the reflectors should primarily target drag and lift. Anti-overturning design should concentrate on oblique wind scenarios within the 45°–75° range and account for abrupt moment changes induced by asymmetric vortices. This work provides a theoretical framework to inform dust-mitigation design criteria and overturning protection systems for PTCs deployed in desert solar thermal plants.Keywords
Funding Information
- National Natural Science Foundation of China (42461011)
- China Postdoctoral Science Foundation (2021M703466)
- Natural Science Innovation and Development Joint Foundation of Chongqing (CSTB2024NSCOLZX0010)
This publication has 46 references indexed in Scilit:
- Impact of long-term dust accumulation on photovoltaic module performance — a comprehensive reviewEnvironmental Science and Pollution Research, 2023
- 3D CFD modelling of dust deposition characteristics and influences on building-mounted photovoltaic systemCase Studies in Thermal Engineering, 2022
- Sustainable site selection for photovoltaic power plant: An integrated approach based on prospect theoryEnergy Conversion and Management, 2018
- Windblown sand saltation: A statistical approach to fluid threshold shear velocityAeolian Research, 2016
- Performance investigation of parabolic trough solar receiverApplied Thermal Engineering, 2016
- Thermal and optical efficiency investigation of a parabolic trough collectorCase Studies in Thermal Engineering, 2015
- Wind speed effect on the flow field and heat transfer around a parabolic trough solar collectorApplied Energy, 2014
- On the effects of windbreaks on the aerodynamic loads over parabolic solar troughsApplied Energy, 2014
- Numerical simulation of wind flow around a parabolic trough solar collectorApplied Energy, 2013
- Compound Wall Treatment for RANS Computation of Complex Turbulent Flows and Heat TransferFlow, Turbulence and Combustion, 2007