Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis
- 3 February 2022
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1052, 407-413
Abstract
In this work, a study of the structure, impact toughness and mechanisms of destruction of steels 08Mn2Si and 07Cr25Ni13 was carried out using optical and electron microscopy. It was found that with a decrease in temperature, the level of impact toughness of the studied steels significantly decreases, so at a temperature of t = -100°C, the impact toughness of 08Mn2Si and 07Cr25Ni13 steel decreases by 83% and 45%, respectively, relative to the temperature t = +20°C. For steel 07Cr25Ni13, in the entire considered range, only the tough component is present in the fracture and there is no temperature of ductile-brittle transition, whereas for steel 08Mn2Si, already at temperatures below t = -41°C (ductile-brittle transition of steel 08Mn2Si), the brittle component begins to dominate and significantly the likelihood of its fragile destruction increases. On the basis of the obtained electronic photographs of the kinks, an artificial neural network (ANN) for the classification of kinks was trained and tested for intermediate test temperatures. When recognizing the viscous component in the fractures of 08Mn2Si steel obtained using the 3D-printing technology by electric arc surfacing, the recognition error does not exceed 7% with the use of ANN.Keywords
This publication has 8 references indexed in Scilit:
- Evaluation of the mechanism of the destruction of metals based on approaches of artificial intelligence and fractal analysisIOP Conference Series: Materials Science and Engineering, 2020
- Analysis of Structure and Mechanical Properties of Co–Cr–Mo Alloy Obtained by 3D PrintingPhysics of Metals and Metallography, 2019
- Evaluation of Cold Resistance of Metals with Various Type of Crystal StructureBulletin of Kalashnikov ISTU, 2019
- The Changing Arctic: Vision of Prospects for Sustainable Development of Northern RegionsWorld Economy and International Relations, 2019
- Comparison and analysis of different 3d printing techniquesInternational journal of Latest Trends in Engineering & Technology, 2017
- Cold brittleness and fracture of metals with various crystal lattices: Dislocation mechanismsTechnical Physics, 2016
- Relation of the fractal dimension of the fracture surface with a set of standard tension characteristics of the materialJournal of Applied Mechanics and Technical Physics, 2011
- Role of silicon in the formation of the corrosion resistance of austenitic materials for cryogenic engineeringRussian Metallurgy (Metally), 2008