Non-Destructive X-ray Characterization of a Novel Joining Method Based on Laser-Melting Deposition for AISI 304 Stainless Steel
Open Access
- 16 December 2021
- Vol. 14 (24) , 7796
Abstract
In this study, an application of the laser-melting deposition additive manufacturing technique as a welding method has been studied for the laser welding (LW) of AISI 304 stainless steel, specifically 0.4 mm and 0.5 mm thick sheets. The welding was carried out without and with filler material. Inconel 718 powder particles were used as filler material in the second case. A series of experiments were designed by changing the process parameters to identify the effect of operating conditions on the weld width, depth, and height. The welds were examined through metallographic experiments performed at various cross-sections to identify the defects and pores. All the deposited welds were passed through a customized mini-focus X-ray system to analyze the weld uniformities. The optimal operating conditions were determined for 0.4 mm and 0.5 mm sheets for the LW with and without filler material. It was found that laser power, laser scanning speed, powder flow rate, and helium to argon gases mixture-control the weld bead dimensions and quality. X-ray analyses showed that the optimal operating conditions gave the least peak value of non-uniformity in the laser welds. This study opens a new window for laser welding via additive manufacturing with X-ray monitoring.Keywords
Funding Information
- European Union’s Horizon 2020 (H2020) research and innovation program under the Marie Skłodowska-Curie (764935)
- Unitatea Executiva Pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii (PCE57/2021 and PED514/2020, 45/2021)
- Romanian Ministry of Education and Research, under Romanian National Nucleu Program LAPLAS VI (16N/2019)
- POC-G (135/2016)
This publication has 21 references indexed in Scilit:
- Experimental design approach to the process parameter optimization for laser welding of martensitic stainless steels in a constrained overlap configurationOptics & Laser Technology, 2011
- Metallurgical and Mechanical Characterization of Laser Spot Welded Low Carbon Steel SheetsSteel Research International, 2010
- Melt pool and keyhole behaviour analysis for deep penetration laser weldingJournal of Physics D: Applied Physics, 2010
- Modeling of laser beam welding of stainless steel sheet butt joint using neural networksCIRP Journal of Manufacturing Science and Technology, 2010
- Characterization and prediction of the heat-affected zone in a laser-assisted mechanical micromachining processInternational Journal of Machine Tools and Manufacture, 2008
- Effects of laser beam energy and incident angle on the pulse laser welding of stainless steel thin sheetJournal of Materials Processing Technology, 2007
- Laser power coupling efficiency in conduction and keyhole welding of austenitic stainless steelSādhanā, 2002
- Direct observation of keyhole behaviour during pulse modulated high-power Nd:YAG laser irradiationJournal of Physics D: Applied Physics, 2000
- Characterization and real-time measurement of geometrical appearance of the weld poolInternational Journal of Machine Tools and Manufacture, 1996
- Microstructural and mechanical characterization of laser-beam welding of a 8090 Al-Li thin sheetJournal of Materials Science, 1996