Reinforcement of Insufficient Transverse Connectivity in Prestressed Concrete Box Girder Bridges Using Concrete-Filled Steel Tube Trusses and Diaphragms: A Comparative Study
Open Access
Abstract
To address the issue of insufficient transverse connectivity in prestressed concrete box girder (PCB) bridges, this study investigates two transverse strengthening methods—installing diaphragms and utilizing concrete-filled steel tube trusses (CFSTTs). A finite element model was developed for a typical 30 m PCB bridge and was validated by on-site load test results for reliability. Based on the deflection and load distribution of PCB bridges before and after reinforcement, as well as the maximum stress and strain of the diaphragms and the CFSTTs, comparative analyses were conducted on diaphragms of different thicknesses and materials, as well as on CFSTTs of various strength grades. The results show that the addition of a transverse partition and CFSTTs can effectively improve the load distribution of the PCB bridge and reduce the maximum deflection of the girder, especially when using the CFSTT reinforcement method. The unique structural design improves the reinforcement effect of the material in the post-elastic stage. When using CFSTTs, increasing the steel tube wall strength significantly reduces the maximum deflection of the main girder. For example, using steel tubes with yield strengths of 235 MPa and 420 MPa filled with concrete of 50 MPa compressive strength reduced the maximum deflections by 15.32% and 24.55%, respectively, and improved the load distribution coefficients by up to 7.31% and 11.57%. Additionally, steel diaphragms demonstrated better reinforcement effects compared with concrete diaphragms. The load transverse distribution coefficients for the CFSTT-reinforced PCB bridge were calculated using the hinge plate (beam) and the rigid plate (beam) methods, showing minimal differences between the two approaches. The findings of this study provide valuable insights into the design of diaphragm and CFSTT reinforcement in PCB bridges, aiding in the selection of optimal reinforcement strategies.Keywords
Funding Information
- National Natural Science Foundation of China (52078122, 2023JGYB118)
- Hunan University Teaching Reform Research Project (52078122, 2023JGYB118)
This publication has 33 references indexed in Scilit:
- Corrosion-induced fragility of existing prestressed concrete girder bridges under traffic loadsEngineering Structures, 2024
- Study on the Mechanical Performance of the Xiuzhen River Bridge Strengthened Using K-brace Composite TrussesKSCE Journal of Civil Engineering, 2023
- Simplified Method for Lateral Distribution Factor of the Live Load of Prefabricated Concrete Box-Girder Bridges with Transverse Post-tensioningKSCE Journal of Civil Engineering, 2022
- Transverse Connection Performance of Prefabricated PC Box Girder Bridge with Transverse Prestress2022
- Finite element modeling of UHPC slabs with dovetail joints and steel wire mesh using an innovative interfacial treating methodStructures, 2022
- Parameters analysis and design of transverse connection strengthening prestressed concrete T‐girder bridgeStructural Concrete, 2021
- Simulation and Design Considerations on Transverse Connection of Prestressed Concrete T-girder BridgeInternational Journal of Steel Structures, 2021
- Parametric study on numerical simulation of missile punching test using concrete damaged plasticity (CDP) modelInternational Journal of Impact Engineering, 2020
- Three-dimensional reinforcement design method and program realization for prestressed concrete box-girder bridges based on a specific spatial lattice grid modelEngineering Structures, 2018
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989