Modelling Flocculation in a Thickener Feedwell Using a Coupled Computational Fluid Dynamics–Population Balance Model
Open Access
Abstract
The flocculation that takes place in the central feedwell of the thickener plays a crucial role in the coal-slurry thickening process, which is not only complex but also largely influenced by the flow characteristics. A coupled computational fluid dynamics–population balance model (CFD–PBM) was used to model the complex flocculation-thickening behaviour in an industrial-scale gravity thickener. The initialisation parameters of the inlet flow were obtained through self-designed image-recognition experiments, and then the effects of different types of conical deflectors on the floc distribution were simulated and analysed using them. The results showed that, under the condition that the angle of the conical deflector’s sides in the vertical plane was known, a reasonable increase in the height of the bottom surface could reduce the annular spanwise vortices at the underflow of the feedwell, thereby avoiding the erosion of the inlet flow and the annular spanwise vortex on the floc deposition layer. However, excessive height on the part of the conical deflector could affect the flocculation effect of solid particles. For the same central feedwell size of the thickener as in the simulation, the best flocculation effect was achieved at an angle of α = 24° in the vertical plane of the conical deflector. Turbulence regulation of the conical deflector promotes the aggregation of fine particles in the fluid of the feedwell, providing a new method for the intensification of the flocculation-concentration process.Keywords
Funding Information
- the International (Regional) Cooperation and Exchange Projects of the National Natural Science Foundation of China (51820105006, 52074189)
- The National Natural Science Foundation of China (General Program) (51820105006, 52074189)
This publication has 52 references indexed in Scilit:
- The effect of process conditions on the flocculation process occurring in an agitated vesselPolish Journal of Chemical Technology, 2012
- Analysis of unsteady gas–liquid flows in a rectangular tank: Comparison of Euler–Eulerian and Euler–Lagrangian simulationsInternational Journal of Multiphase Flow, 2011
- Pressure Fluctuation in the Submerged Circulative Impinging Stream ReactorChinese Journal of Chemical Engineering, 2006
- Mechanistic analysis and computer simulation of impact breakage of agglomerates: Effect of surface energyChemical Engineering Science, 2006
- Polymer flocculation of calcite: Population balance modelAIChE Journal, 2006
- Fluid flow in thickener feedwell modelsMinerals Engineering, 2003
- Impact attrition of particulate solids. Part 1: A theoretical model of chippingChemical Engineering Science, 2002
- Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfieldJournal of Fluid Mechanics, 1984
- Collision rates of small particles in a vigorously turbulent fluidChemical Engineering Science, 1975
- On the collision of drops in turbulent cloudsJournal of Fluid Mechanics, 1956