Evaluation of Spoiler Model Based on Air Cooling on Lithium-Ion Battery Pack Temperature Uniformity
Open Access
Abstract
Electric vehicles (EVs) and hybrid electric vehicles (HEVs) are a new trend for the vehicle industry, due to the environmental regulations of the internal combustion engine (ICE) and pollutant emission of transportation. However, despite being very promising, the durability of the battery, due to overheating, is still an obstacle. In particular, electric vehicle batteries are manufactured with high voltage and high capacity to ensure power and energy efficiency. For this reason, a high temperature is generated in the system, which reduces the battery performance and life cycle. In this study, three different layouts, based on a direct contact air-cooled system, are designed to compare and improve the cooling performance. Further, a battery cooling test is conducted to verify the designed model. The results show that the spoiler model reduces the maximum battery temperature by (about) 16%, and effectively improves the temperature distribution of the battery cell by (about) 65%, when compared with a conventional cooling method without a spoiler.Keywords
Funding Information
- National Research Foundation of Korea (2021RIS-004)
This publication has 22 references indexed in Scilit:
- Development of cooling strategy for an air cooled lithium-ion battery packJournal of Power Sources, 2014
- Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategiesApplied Energy, 2014
- Numerical investigation of thermal behaviors in lithium-ion battery stack dischargeApplied Energy, 2014
- A comparative study of commercial lithium ion battery cycle life in electrical vehicle: Aging mechanism identificationJournal of Power Sources, 2014
- Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the applicationApplied Energy, 2013
- Electro-thermal modeling and experimental validation for lithium ion batteryJournal of Power Sources, 2012
- Thermal analysis and management of lithium–titanate batteriesJournal of Power Sources, 2011
- Cycle-life model for graphite-LiFePO4 cellsJournal of Power Sources, 2011
- Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehiclesJournal of Power Sources, 2006
- Thermal management of Li-ion battery with phase change material for electric scooters: experimental validationJournal of Power Sources, 2005