Sister Rod Destructive Examinations (FY23): Appendix J: Leaching of High Burnup Used Nuclear Fuel in Deionized Water
Open Access
- 31 January 2024
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
The leaching experiment aims to understand the trends in the radiolysis-enhanced dissolution of HBU SNF when exposed to water (e.g., in-reactor or in-pool cladding failures). Specimens from a baseline M5-clad rod and a heat-treated M5 rod were cut from the fractured CIRFT specimens and placed in 100 mL deionized water for a period of 128 days. Both radial and axial sections were cut to provide different surface areas of fuel in contact with the leachate. During the four-month exposure period, aliquot samples of the leachate were analyzed using gamma spectroscopy and inductively coupled plasma - mass spectrometry (ICP-MS). The analysis quantified the amount of fuel leached into the solutions and provided individual isotopic release fractions (of 30+ isotopes) which were compared as a function of time and surface area of the fuel exposed.Consistent with existing literature, the leaching followed a trend in which isotopes of certain elements such as Cs and Mo were among the first species in the matrix to dissolve, and with the highest release rates. This was followed by a gradual matrix dissolution consisting of uranium and other actinides and a slower-than-matrix release from some isotopes, including Ru and Rh. It was also observed that the circumferential samples having less exposed fuel surface area (to begin with) leached more than the axial samples for a majority of the isotopes during the timespan of the study. Previous experiments were conducted by decladding or exposing the pellet-clad surface completely, but the samples used in this study retained the cladding. One possible explanation for the higher leaching rate of the circumferential samples is that the pellet-clad interface, which has a greater density of grain boundaries and defects, may be the most vulnerable area to leaching of fuel in the presence of water.Keywords
Funding Information
- USDOE Office of Nuclear Energy (NE), Office of Spent Fuel and Waste Disposition. Office of Spent Fuel and Waste Science and Technology
- DOE (AC05-00OR22725)
This publication has 27 references indexed in Scilit:
- Ruthenium as an important element in nuclear energy and cancer treatmentApplied Radiation and Isotopes, 2020
- The effect of temperature and fuel surface area on spent nuclear fuel dissolution kinetics under H2 atmosphereJournal of Nuclear Materials, 2020
- Leaching of spent nuclear fuels in aerated conditions: Influences of sample preparation on radionuclide release patternsJournal of Nuclear Materials, 2019
- Physical and mechanical characterization of irradiated uranium dioxide with a broad burnup range and different dopants using acoustic microscopyJournal of Nuclear Materials, 2017
- Instant release of fission products in leaching experiments with high burn-up nuclear fuels in the framework of the Euratom project FIRST- NuclidesJournal of Nuclear Materials, 2017
- Dissolution experiments of commercial PWR (52 MWd/kgU) and BWR (53 MWd/kgU) spent nuclear fuel cladded segments in bicarbonate water under oxidizing conditions. Experimental determination of matrix and instant release fractionJournal of Nuclear Materials, 2015
- Rapid aqueous release of fission products from high burn-up LWR fuel: Experimental results and correlations with fission gas releaseJournal of Nuclear Materials, 2012
- Neptunium(V) Partitioning to Uranium(VI) Oxide and Peroxide SolidsEnvironmental Science & Technology, 2005
- Incorporation mechanisms of actinide elements into the structures of U6+ phases formed during the oxidation of spent nuclear fuelJournal of Nuclear Materials, 1997
- Corrosion of used nuclear fuel in aqueous perchlorate and carbonate solutionsJournal of Nuclear Materials, 1996