Estimating Tree Defects with Point Clouds Developed from Active and Passive Sensors
Open Access
- 17 April 2022
- journal article
- research article
- Published by MDPI AG in Remote Sensing
- Vol. 14 (8) , 1938
Abstract
Traditional inventories require large investments of resources and a trained workforce to measure tree sizes and characteristics that affect wood quality and value, such as the presence of defects and damages. Handheld light detection and ranging (LiDAR) and photogrammetric point clouds developed using Structure from Motion (SfM) algorithms achieved promising results in tree detection and dimensional measurements. However, few studies have utilized handheld LiDAR or SfM to assess tree defects or damages. We used a Samsung Galaxy S7 smartphone camera to photograph trees and create digital models using SfM, and a handheld GeoSLAM Zeb Horizon to create LiDAR point cloud models of some of the main tree species from the Pacific Northwest. We compared measurements of damage count and damage length obtained from handheld LiDAR, SfM photogrammetry, and traditional field methods using linear mixed-effects models. The field method recorded nearly twice as many damages per tree as the handheld LiDAR and SfM methods, but there was no evidence that damage length measurements varied between the three survey methods. Lower damage counts derived from LiDAR and SfM were likely driven by the limited point cloud reconstructions of the upper stems, as usable tree heights were achieved, on average, at 13.6 m for LiDAR and 9.3 m for SfM, even though mean field-measured tree heights was 31.2 m. Our results suggest that handheld LiDAR and SfM approaches show potential for detection and measurement of tree damages, at least on the lower stem.Keywords
Funding Information
- Oregon State University (Department of Forest Engineering, Resources and Management, College of Forestry Research Forests)
- U.S. Department of Agriculture (2019-67019-29462)
This publication has 25 references indexed in Scilit:
- Evaluation of Close-Range Photogrammetry Image Collection Methods for Estimating Tree DiametersISPRS International Journal of Geo-Information, 2018
- Stem Measurements and Taper Modeling Using Photogrammetric Point CloudsRemote Sensing, 2017
- Accuracy of Structure from Motion models in comparison with terrestrial laser scanner for the analysis of DBH and height influence on error behaviourJournal of Forest Science, 2016
- Forest Stand Inventory Based on Combined Aerial and Terrestrial Close-Range PhotogrammetryForests, 2016
- Forest Inventory with Terrestrial LiDAR: A Comparison of Static and Hand-Held Mobile Laser ScanningForests, 2016
- Accuracy of Reconstruction of the Tree Stem Surface Using Terrestrial Close-Range PhotogrammetryRemote Sensing, 2016
- Stem quality assessment using terrestrial laser scanning technology: a case study of ash trees with a range of defects in two stands in IrelandScandinavian Journal of Forest Research, 2015
- The Use of a Hand-Held Camera for Individual Tree 3D Mapping in Forest Sample PlotsRemote Sensing, 2014
- Clear wood content in standing trees predicted from branch scar measurements with terrestrial LiDAR and verified with X-ray computed tomographyCanadian Journal of Forest Research, 2014
- Effects of training for inexperienced surveyors on data quality of tree diameter and height measurementsSilva Fennica, 2010