Porous NiO nanosheets self-grown on alumina tube using a novel flash synthesis and their gas sensing properties
- 9 December 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (7) , 4880-4885
Abstract
Porous NiO nanosheets were self-grown on an alumina tube with a pair of Au electrodes connected by platinum wires via a simple solution combustion synthesis. A cubic NiO phase was obtained by a mixed solution of an oxidizer of nickel nitrate and a fuel of ethylene glycol (EG) at 400 °C. The phases and the morphologies of the materials self-grown on an alumina tube were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results showed that the alumina tube was entirely covered by NiO nanosheets with several micrometers in thickness. The NiO nanosheets on the surface of the tube were assembled by a large number of nanoparticles of irregular shapes and pores with different sizes. The electronic and gas-sensing characteristics of the self-grown porous NiO nanosheets for volatile organic compound (VOC) vapours (ethanol, acetone, methanol, and formaldehyde) were investigated. The resistance of the sensor directly based on the self-grown NiO dramatically drops from 100–240 °C, and then slightly decreases with further increasing temperature to about 28 kΩ at 400 °C. The sensor based on the self-grown NiO exhibits low detection limit, fast response and recovery and wide dynamic range detection to VOC vapours, especially ethanol, at the respectively optimal operating temperatures.Keywords
This publication has 29 references indexed in Scilit:
- Highly sensitive and selective gas sensors using p-type oxide semiconductors: OverviewSensors and Actuators B: Chemical, 2014
- Hierarchical NiO hollow microspheres assembled from nanosheet-stacked nanoparticles and their application in a gas sensorRSC Advances, 2012
- Metal Oxide Nanostructures and Their Gas Sensing Properties: A ReviewSensors, 2012
- The Role of NiO Doping in Reducing the Impact of Humidity on the Performance of SnO2‐Based Gas Sensors: Synthesis Strategies, and Phenomenological and Spectroscopic StudiesAdvanced Functional Materials, 2011
- Thin-walled NiO tubes functionalized with catalytic Pt for highly selective C2H5OH sensors using electrospun fibers as a sacrificial templateChemical Communications, 2011
- Synthesis and enhanced gas-sensing properties of ultralong NiO nanowires assembled with NiO nanocrystalsSensors and Actuators B: Chemical, 2011
- Synthesis of Mesoporous NiO Nanosheets for the Detection of Toxic NO2 GasChemistry – A European Journal, 2011
- Gas sensing properties of p-type hollow NiO hemispheres prepared by polymeric colloidal templating methodSensors and Actuators B: Chemical, 2011
- Influence of humidity on CO sensing with p-type CuO thick film gas sensorsSensors and Actuators B: Chemical, 2011
- Electrospun Nanofibers of p-Type NiO/n-Type ZnO Heterojunctions with Enhanced Photocatalytic ActivityACS Applied Materials & Interfaces, 2010