Gamma-irradiation effects on track etching characteristics of polyester nuclear track detector
- 1 February 2006
- journal article
- research article
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 161 (2) , 131-133
Abstract
The effects of gamma irradiation in the dose range of 5–51 Mrad on the etching characteristics of a locally available Garware polyester film have been studied. The bulk etch rates at different doses were determined by the gravimetric method. The track etch rates at different doses were determined by measuring the track lengths. From the results, it is found that the bulk as well as the track etch rates increase with the increase in gamma dose. The increase in etch rates can be explained on the basis of scission of the detector due to gamma irradiation that enhances the dissolution rates. The sensitivity, which is the ratio of track etch rate to bulk etch rate, has been found to increase with gamma dose up to 11.5 Mrad doses and after that it decreases. From the measured bulk etch rates at different temperatures, the activation energies for bulk etching at different doses have also been determined.Keywords
This publication has 6 references indexed in Scilit:
- The etching and structural response of Makrofol-N and Makrofol-KG polycarbonate to γ-irradiationRadiation Effects and Defects in Solids, 2004
- Measurement of alpha to spontaneous fission branching ratios of238Pu and240Pu by solid state nuclear track detectorsJournal of Radioanalytical and Nuclear Chemistry, 1999
- Effects of radiations on the characteristics of alpha and fission tracks in CR-39 detectorsRadiation Effects and Defects in Solids, 1994
- The effect of gamma dose on the alpha response of CR-39International Journal of Radiation Applications and Instrumentation. Part D. Nuclear Tracks and Radiation Measurements, 1986
- Anomalous track development in CR-39: Effects of gamma irradiationNuclear Instruments and Methods in Physics Research, 1982
- Nuclear Tracks in Solids1975