Rotor Vibration Due to Collision With Annular Guard During Passage Through Critical Speed
Authors:
- 1 April 1998
- journal article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 120 (2) , 544-550
Abstract
This paper deals with a nonstationary vibration of a rotor due to its collision with a guard during passage through a critical speed. An unbalanced rigid rotor supported by springs and dampers is accelerated at a constant angular acceleration and collides with an annular guard supported by springs and dampers. This dynamic process is calculated by the Runge-Kutta method, and effects of system-parameters on the process are discussed. The collision phenomenon is analyzed through two different theories. In the collision theory, the law of conservation of momentum and the coefficient of restitution are used in order to obtain rotor and guard velocities after collision. The impulse of the force induced by collision is assumed to be equal to the momentum change before and after collision. In the contact force theory, the contact force is assumed to be proportional to the overlapped displacement of the two bodies. Few differences are observed between the calculated responses based on the two theories. In some cases, the rotor executes a diverging backward whirl due to the friction force that occurs during collision with the guard and can not pass through the critical speed. The criteria maps for nonoccurrence of the backward whirl are shown.Keywords
This publication has 8 references indexed in Scilit:
- Transient Response Technique Applied to Active Magnetic Bearing Machinery During Rotor DropJournal of Vibration and Acoustics, 1996
- Observations of Subcritical Superharmonic and Chaotic Response in RotordynamicsJournal of Vibration and Acoustics, 1992
- Transient Response Technique Applied to Active Magnetic Bearing Machinery During Rotor Drop1991
- Non-linear transient analysis of rotor-casing rub eventsJournal of Sound and Vibration, 1987
- The Dynamic Stability of Rotor/Stator Radial Rubs in Rotating MachineryJournal of Engineering for Industry, 1969
- Interaction of a Whirling Rotor with a Vibrating Stator across a Clearance AnnulusJournal of Mechanical Engineering Science, 1968
- Stator Whirl With Rotors in Bearing ClearanceJournal of Engineering for Industry, 1967
- On the "Shaft Whipping"excited by Dry Friction of BearingsTransactions of the Japan Society of Mechanical Engineers, 1951