Improved Performance of Ceramic Solar Absorber Particles Coated with Black Oxide Pigment Deposited by Resonant Acoustic Mixing and Reaction Sintering
Open Access
Abstract
Spherical particles based on bauxite-type raw materials, commonly referred to as proppants, are state-of-the-art for particle receivers of concentrated solar power plants. Particles are heated in a fluidized reactor by focused sunlight and are transported to a heat-exchanger or a storage tank. Therefore, key properties for absorber particles are high solar absorptance and mechanical endurance. Due to their relatively poor content of color-giving transition-metal cations, bauxite-derived proppants show limited solar absorptance, which is even deteriorating by long-term heat exposure. A deep-black Cu, Mn, Fe- pigment with a spinel structure was employed to coat standard proppants in order to improve solar absorptance. The coating process was performed by high-energy, high-speed mixing of proppants and small quantities of spinel powders in a resonant acoustic mixer. A continuous powder coating is achieved by electrostatic attraction between the proppant surface and the coating particles. Consolidation and strong attachment of the coating is achieved by the subsequent sintering beyond the spinel melting temperature. Chemical reaction and bonding between spinel coating and proppant lead to the incorporation of Al, Mg and Ti into the spinel structure. Coated bauxite proppants exhibit a significantly improved, long-term stable solar absorption accompanied by a promising abrasion resistance. The presented coating methodology is considered to be scalable to industrial production.Keywords
Funding Information
- European Union’s Horizon 2020 Research and Innovation Action (RIA) (No. 958418)
This publication has 12 references indexed in Scilit:
- A review of material and coatings in solar collectorsMaterials Today: Proceedings, 2020
- Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plantsEnergy Storage, 2019
- Development of high performances solar absorber coatings2019
- Solar tower system temperature range optimization for reduced LCOE2019
- A Comprehensive Review of Thermal Energy StorageSustainability, 2018
- The Development of Direct Absorption and Storage Media for Falling Particle Solar Central ReceiversJournal of Solar Energy Engineering, 2015
- Physical Properties of Solid Particle Thermal Energy Storage Media for Concentrating Solar Power ApplicationsEnergy Procedia, 2014
- Review of high-temperature central receiver designs for concentrating solar powerRenewable and Sustainable Energy Reviews, 2014
- Thermal performance of a solar-aided latent heat store used for space heating by heat pumpSolar Energy, 2000
- Effective ionic radii in oxides and fluoridesActa Crystallographica Section B: Structural Science, Crystal Engineering and Materials, 1969