A Study on Performance Characteristics of a Heat Pump System with High-Pressure Side Chiller for Light-Duty Commercial Electric Vehicles
Open Access
Abstract
One of barriers for the present heat pump system’s application in an electric vehicle was decreased performance under cold ambient conditions due to the lack of evaporating heat source. In order to improve the heat pump’s performance, a high-pressure side chiller was additionally installed, and the tested heat pump system was modified with respect to refrigerant flow direction along with operating modes. In the present work, the performance characteristics of the heat pump system with a high-pressure side chiller for light-duty commercial electric vehicles were studied experimentally under hot and cold ambient conditions, reflecting real road driving. The high-pressure side chiller was located after the electric compressor so that the highest refrigerant temperature transferred the heat to the coolant. The controlled coolant with discharged refrigerant from the electric compressor was used to heat up the cabin, transferring heat to the inlet air like the internal combustion engine vehicle’s heating system, except with unused engine waste heat. In the cooling mode, for the exterior air temperature of 35 °C and interior air temperature of 25 °C, cooling performance along with the compressor speed showed that the system efficiency decreased by 16.4% on average, the cooling capacity increased by 8.0% on average and the compressor work increased by 27% on average. In heating mode, at the exterior and interior air temperature of −6.7 °C, compressor speed and coolant temperature variation with steady conditions were tested with respect to heating performance. In transient mode, to increase coolant temperature with a closed loop from −6.7 °C, tested system characteristics were studied along the compressor speed with respect to heating up the cabin. As the inlet air of the HVAC was maintained at −6.7 °C, even though the heat-up rate of the cabin room was a little slow, the cabin temperature reached 20 °C within 50 min and the temperature difference with the ambient air attained 28.7 °C.Keywords
This publication has 30 references indexed in Scilit:
- Study on Economized Vapor Injection Heat Pump System Using Refrigerant R32International Journal of Air-Conditioning and Refrigeration, 2016
- Experimental investigation on heating performance of heat pump for electric vehicles at −20 °C ambient temperatureEnergy Conversion and Management, 2015
- Experimental Investigation on Heat Pump for Electric Vehicles with different Refrigerant Injection CompressorsEnergy Procedia, 2015
- Advances on air conditioning and heat pump system in electric vehicles – A reviewRenewable and Sustainable Energy Reviews, 2014
- Heating performance characteristics of a dual source heat pump using air and waste heat in electric vehiclesApplied Energy, 2014
- Experimental Investigation on Heating Performance of Heat Pump for Electric Vehicles in Low Ambient TemperatureEnergy Procedia, 2014
- Performance characteristics of mobile heat pump for a large passenger electric vehicleApplied Thermal Engineering, 2013
- Heating performance characteristics of stack coolant source heat pump using R744 for fuel cell electric vehiclesJournal of Mechanical Science and Technology, 2012
- Characteristic Evaluation on the Cooling Performance of an Electrical Air Conditioning System Using R744 for a Fuel Cell Electric VehicleEnergies, 2012
- Measurement and Evaluation of Heating Performance of Heat Pump Systems Using Wasted Heat from Electric Devices for an Electric BusEnergies, 2012