Modeling of integrated shape memory alloy and Macro-Fiber Composite actuated trailing edge
- 23 June 2020
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 29 (8) , 085005
Abstract
Owing to their high energy densities, smart materials like shape memory alloys (SMAs), Macro-Fiber Composites (MFCs) and, electroactive polymers (EAPs) have massive potential as actuators in wing morphing applications. In this article, a detailed numerical model is developed for the shape prediction of an elastic base that is actuated by a combination of a shape memory alloy (SMA) wire and a Macro-Fiber Composite (MFC) bimorph. It has been demonstrated using the model that it is possible to achieve large deflections at low frequencies by virtue of the phase transformations in the SMA wire and rapid actuation with small deflections due to the MFC bimorph. In the developed scheme, the elastic base is modeled using non-linear Euler-Bernoulli beam theory. The influence of the non-linear hysteresis in the SMA wire and the linear actuation characteristics of the MFC is studied by incorporating thermo-mechanical and electro-mechanical constitutive behavior into the non-linear beam theory. The system of coupled equations hence obtained, is solved iteratively to obtain the deflected shape of the elastic base. The results from the developed numerical scheme are validated against the previously available studies in the literature and experiments. Additionally, the synergistic advantage of using the two actuators together has been shown through experiments. As an illustration, a smart trailing edge camber morphing concept is developed by integrating the flexible elastic structure along with the two smart actuators to a NACA 0012 airfoil as the trailing edge.Keywords
Funding Information
- Aeronautics Research and Development Board (ARDB/01/1051810/M/I, DRDO/DFTM/04/3304/ PC/02/776/D(R)
This publication has 39 references indexed in Scilit:
- Modeling and design of a class of hybrid bistable symmetric laminates with cantilever boundary configurationComposite Structures, 2020
- Shape prediction of a composite wing panel under the action of an SMA wire and an MFC bimorph2019
- Synergistic smart morphing aileron: Experimental quasi-static performance characterizationJournal of Intelligent Material Systems and Structures, 2014
- A review on shape memory alloys with applications to morphing aircraftSmart Materials and Structures, 2014
- Dynamic control of a bistable wing under aerodynamic loadingSmart Materials and Structures, 2013
- Morphing unmanned aerial vehiclesSmart Materials and Structures, 2011
- Flexible Skins for Morphing Aircraft Using Cellular Honeycomb CoresJournal of Intelligent Material Systems and Structures, 2009
- Morphing Wing Micro-Air-Vehicles via Macro-Fiber-Composite Actuators2007
- Evaluation of hexagonal chiral structure for morphing airfoil conceptProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2005
- Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industryJournal of Materials Processing Technology, 2001