Adaptive-biased buffer with low input capacitance
Authors:
- 27 April 2000
- journal article
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 36 (9) , 775-776
Abstract
A new analogue buffer, which is a differential-pair-based level shifter followed by an adaptive-biased cascode source follower, is proposed. The structure exhibits low input capacitances, enhanced slew rate, high bandwidth and low distortion. The simulated results have shown input capacitance of 99.5 fF at 1 MHz, slew rate of 55.5 V/µs, –3 dB bandwidth of 37.9 MHz, and THD less than 1% for 1 Vpp input signal up to 6 MHz at a 100 kΩ//15 pF load. The buffer consumes 2.4 mW at 5 V supply in a 0.8 µm N-well CMOS technology.Keywords
This publication has 6 references indexed in Scilit:
- High-swing, high-drive CMOS bufferIEE Proceedings - Circuits, Devices and Systems, 1995
- An enhanced slew rate source followerIEEE Journal of Solid-State Circuits, 1995
- High-drive CMOS buffer for large capacitive loadsElectronics Letters, 1991
- High-bandwidth CMOS test buffer with very small input capacitanceElectronics Letters, 1990
- Compact high-frequency output buffer for testing of analog CMOS VLSI circuitsIEEE Journal of Solid-State Circuits, 1989
- CMOS voltage to current transducersIEEE Transactions on Circuits and Systems, 1985