The Reducing Capacity of Milk and Milk Products as Measured by a Modified Ferricyanide Method

Authors:

Abstract
In 1945 Chapman and McFarlane (5) published a method for determining reducing substances in milk and milk products by heating with potassium ferricyanide under specific conditions. The method was adapted from the procedure used by Anson (1, 2), Mirsky (12) and Mirsky and Anson (13) for determining sulfhydryl groups in proteins. Chapman and Mc-Farlane found that fresh milk possesses considerable capacity to reduce ferricyanide under the conditions used and that heat treatment of milk or storage of milk powder open to the atmosphere increases the reducing capacity. In 1945 Harland and Ashworth (8) reported the use of thiamin disul fide for estimation of the reducing power of milk. This reagent evidently is a much weaker oxidant than ferricyanide, at least under the conditions used, since it is not reduced at all by normal unheated milk. Heat treatment, however, does produce materials which reduce thiamin disulfide but long continued heat treatment in the presence of air causes a subsequent decrease in reducing power. The disparity in behavior of milk to these two reagents prompted Chapman and McFarlane (6) to express the opinion that these reagents react with different reducing systems. This opinion is somewhat substantiated by the work of Lea (10), which indicates that materials produced by interaction of lactose and protein are responsible for the increase in reducing capacity of dry milk during storage at 47 ° C. and 55 per cent relative humidity. The work reported in this paper was undertaken prior to publication of Lea's results to examine the ferricyanide method and to determine which constituents of milk reduce this reagent and contribute to the increases produced by processing and storage. METHOD Factors af]ecting reductio~ of ferricyanic~e. The extent to which ferricyanide is reduced by a system such as milk is strongly influenced by the

This publication has 14 references indexed in Scilit: