Numerical Analysis of Effect of Initial Bubble Size on Captured Bubble Distribution in Steel Continuous Casting Using Euler-Lagrange Approach Considering Bubble Coalescence and Breakup
Open Access
Abstract
A mathematic model considering the bubble coalescence and breakup using the Euler-Lagrange approach has been developed to study the effect of the initial bubble size on the distribution of bubbles captured by the solidification shell. A hard sphere model was applied for dealing with the bubble collision. Advanced bubble coalescence and breakup models suitable for the continuous casting system and an advanced bubble captured criteria have been identified established with the help of user-defined functions of FLUENT. The predictions of bubble behavior and captured bubble distribution agree with the water model and plant measurements well respectively. The results show that the number of small bubbles captured by solidification shell is much higher than that of large bubbles. What is more, the number of captured bubbles at the sidewalls decreases with the distance from the meniscus. For the case of large gas flow rate (gas flow fraction of 8.2%), the initial size of bubbles has little effect on bubble captured distribution under various casting speeds. When the gas flow rate is small (gas flow fraction of 4.1%), the number density of captured bubbles increases as the initial bubble size increases, and the effect of initial bubbles size on captured bubble number density is amplified when the casting speed decreases. The average captured bubble diameter is about 0.12–0.14 mm. Additionally, for all cases, the initial bubble size hardly affects the average size of captured bubbles.Keywords
This publication has 32 references indexed in Scilit:
- Numerical Simulation of Fluid Flow, Heat Transfer, Species Transfer, and Solidification in Billet Continuous Casting Mold with M-EMSMetals, 2019
- Visualization of Liquid Metal Two-phase Flows in a Physical Model of the Continuous Casting Process of SteelMetallurgical and Materials Transactions B, 2014
- Population Balance Modeling of Polydispersed Bubbly Flow in Continuous-Casting Using Multiple-Size-Group ApproachMetallurgical and Materials Transactions B, 2014
- Effect of refractory properties on initial bubble formation in continuous-casting nozzlesMetals and Materials International, 2010
- Investigation of Fluid Flow and Steel Cleanliness in the Continuous Casting StrandMetallurgical and Materials Transactions B, 2007
- Experimental Simulation and Mathematical Modeling of Air Bubble Movement in Slab Caster MoldISIJ International, 2006
- Effects of clogging, argon injection, and continuous casting conditions on flow and air aspiration in submerged entry nozzlesMetallurgical and Materials Transactions B, 2001
- Turbulent flow of liquid steel and argon bubbles in slide-gate tundish nozzles: Part I. model development and validationMetallurgical and Materials Transactions B, 2001
- Water model study of horizontal molten steel-Ar two-phase jet in a continuous casting moldMetallurgical and Materials Transactions B, 2000
- Simulation of Argon Gas Flow Effects in a Continuous Slab CasterMetallurgical and Materials Transactions B, 1994