Evolution of Chemical Composition and Modeling of Growth Nonmetallic Inclusions in Steel Containing Yttrium
Open Access
- 23 November 2021
- Vol. 14 (23) , 7113
Abstract
The programs WYK_Stal and Bi-Growth, developed at AGH-UST, Kraków, Poland, were used for simulating the refining process, the formation of non-metallic inclusions, and their growth. The Fe-Y-Al-O-S-Ca system in pre-oxidized steel was analyzed, where yttrium formed precipitates from both O and S. When first Al and second Y were added to steel, the proportion of Al2O3 inclusions remained constant. This resulted in higher yttrium losses for oxide formation, whereas the sulfur content promoted sulfide phase formation. The introduction of yttrium at the end of refining contributed to reducing the consumption of this element in the non-metallic phase formation. The addition of aluminum and then calcium were sufficient to achieve a high degree of deoxidation and desulfurization. Calculations performed with WYK_Stal for both (a) and (c) versions of the model showed that the sulfide phase was constituted by CaS and FeS (model c) and CaS (model (a)). The participation of the calcium sulfide phase turned out to be dominant in the inclusions. Their presence was also identified in the slag phase. Simulations of the growth of complex oxide and oxo-sulfide inclusions using the Bi_Growth program showed that the yttrium content of the steel has a decisive role in the formation of complex oxide inclusions and the final oxygen content of the steel. In contrast, for the growth of oxide-sulfide inclusions, the character of growth is determined by the sulfur content of steel.Keywords
Funding Information
- Akademia Górniczo-Hutnicza im. Stanislawa Staszica (project no. 16.16.170.654.)
This publication has 19 references indexed in Scilit:
- Influence of Inclusions Modification on Nozzle CloggingArchives of Metallurgy and Materials, 2012
- Modeling of Oxide Precipitates Chemical Composition During Steel DeoxidizationArchives of Metallurgy and Materials, 2011
- Thermodynamic Evaluation of Formation of Oxide–Sulfide Duplex Inclusions in SteelISIJ International, 2008
- Influence of Rare Earth Elements on Microstructure and Mechanical Properties of Cast High-Speed Steel RollsJournal of Rare Earths, 2007
- Yttrium addition to heat-resistant cast stainless steelScripta Materialia, 2006
- Phase Equilibria of the MnO-SiO2-CrOx System at 1873 K under Controlled Oxygen Partial Pressure.ISIJ International, 2001
- Evaluation of fatigue-crack initiation at inclusions in fully pearlitic steelsMaterials Science and Engineering: A, 1993
- A Study of thermodynamics and phase equilibria in order to predict the behavior of yttrium in iron and steelInorganica Chimica Acta, 1987
- Thermodynamics of FeYS, FeYO and FeYSO metallic solutionsJournal of the Less Common Metals, 1985
- Ladle injection metallurgyInternational Materials Reviews, 1982