Sustainable Cementitious Materials: Strength and Microstructural Characteristics of Calcium Carbide Residue-Activated Ground Granulated Blast Furnace Slag–Fly Ash Composites
Open Access
- 19 December 2024
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 16 (24) , 11168
Abstract
This study developed a sustainable low-carbon cementitious material using calcium carbide residue (CCR) as an alkali activator, combined with ground granulated blast furnace slag (GGBS) and fly ash (FA) to form a composite. The objective was to optimize the CCR dosage and the GGBS-to-FA ratio to enhance the unconfined compressive strength (UCS) of the composite, providing a viable alternative to traditional Portland cement while promoting solid waste recycling. Experiments were conducted with a water-to-binder ratio of 0.55, using six GGBS-to-FA ratios (0:10, 2:8, 4:6, 6:4, 8:2, and 10:0) and CCR contents ranging from 2% to 12%. Results indicated optimal performance at a GGBS-to-FA ratio of 8:2 and an 8% CCR dosage, achieving a peak UCS of 18.04 MPa at 28 days, with 79.88% of this strength reached within just 3 days. pH testing showed that with 8% CCR, pH gradually decreased over the curing period but increased with higher GGBS content, indicating enhanced reactivity. Microstructural analyses (XRD and SEM-EDS) confirmed the formation of hydration products like C-(A)-S-H, significantly improving density and strength. This study shows CCR’s potential as an effective and environmentally friendly activator, advancing low-carbon building materials and resource recycling in construction.Keywords
Funding Information
- National Natural Science Foundation of China (52169022)
This publication has 46 references indexed in Scilit:
- The pressure of coal consumption on China's carbon dioxide emissions: A spatial and temporal perspectiveAtmospheric Pollution Research, 2024
- Preparation and carbonation hardening of low calcium CO2 sequestration materials from waste concrete powder and calcium carbide slagCement and Concrete Composites, 2023
- Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymerCement and Concrete Composites, 2023
- The view of technological innovation in coal industry under the vision of carbon neutralizationInternational Journal of Coal Science & Technology, 2021
- Advances in carbon capture, utilization and storageApplied Energy, 2020
- Bar-concrete bond in mixes containing calcium carbide residue, fly ash and recycled concrete aggregateCement and Concrete Composites, 2018
- Investigation of hydration products of fly ash–slag pastesJournal of Thermal Analysis and Calorimetry, 2017
- Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymerJournal of Materials Science, 2010
- Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly ash particlesJournal of Materials Science, 2009
- Factors affecting the strength of alkali-activated slagCement and Concrete Research, 1994