Influence of feedstock mixtures on the fuel characteristics of blended cornhusk, cassava peels, and sawdust briquettes
Open Access
- 16 March 2023
- journal article
- research article
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (17) , 16211-16226
Abstract
This study investigated the influence of feedstock mixture on the fuel characteristics of briquettes produced from sawdust (SD), cornhusk (CH), and cassava peels (CP) for domestic and industrial applications. The feedstock was each studied singly and mixed in the ratio 30/70, 50/50, and 70/30 with the binder to feedstock ratio of 20:100 by mass for briquette production and characterization. The elemental and proximate analyses were carried out to evaluate fuel properties. The briquette structural arrangement was determined with the Scanning Electron Microscope and Energy Dispersive X-Ray Detector, while the functional groups was obtained from FTIR analyzer. A non-isothermal Coats-Redfern method was carried out to determine the activation energy and pre-exponential factors. The O/C and H/C ratios slightly decrease when the mixing ratio of sawdust with other feedstocks increased. The bonding of the briquette samples was enhanced by blending CH with other feedstocks, thereby improving the structural integrity of the mixed briquettes and closing the gaps and voids within and between particles. The highest infrared transmittance of C–H, OH, C–O, and C=C was found in SD briquette followed by CH and CP while CH briquette contained higher C–C. The activation energy of the briquettes varied between 39.70 and 60.76 kJ/mol. The hypothetical thermal plant analysis of the briquettes shows that mixed CH/CP and CH/SD respectively reduced the potential for CO2 and NO2 emissions. Furthermore, Ca, P, and K played the most significant role in the briquette’s agglomeration. The mixing of feedstocks for briquettes production has great fuel potential for heating applications.Keywords
Funding Information
- University of South Africa
This publication has 39 references indexed in Scilit:
- Combustion behavior of different kinds of torrefied biomass and their blends with ligniteBioresource Technology, 2015
- Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdustRenewable Energy, 2014
- Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysisBioresource Technology, 2012
- Physical and chemical characteristics of products from the torrefaction of yellow poplar (Liriodendron tulipifera)Bioresource Technology, 2012
- Characterisation of palm empty fruit bunch (PEFB) and pinewood bio-oils and kinetics of their thermal degradationBioresource Technology, 2012
- Biochar as a Fuel: 1. Properties and Grindability of Biochars Produced from the Pyrolysis of Mallee Wood under Slow-Heating ConditionsEnergy & Fuels, 2009
- Thermogravimetric analysis and kinetic study on large particles of printed circuit board wastesWaste Management, 2009
- Patterns and kinetics of pyrolysis of tobacco under inert and oxidative conditionsJournal of Analytical and Applied Pyrolysis, 2007
- Mechanism of Palm Oil Waste Pyrolysis in a Packed BedEnergy & Fuels, 2006
- Kinetic Parameters from Thermogravimetric DataNature, 1964