Assessment of a miniature four-roll mill and a cross-slot microchannel for high-strain-rate stagnation point flows
- 14 March 2018
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 29 (4) , 045302
Abstract
Stagnation point flows have been widely used to study the deformation and break-up of objects in two-dimensional pure straining flows. Here, we report a systematic study of the characterisation of stagnation point flows in two devices, a miniature Taylor’s four-roll mill and a cross-slot microchannel. The aim of the study is to find the best platform suitable for investigating the effect of strain rate on the mechanical properties of waterborne microorganisms. Using micro-PIV, the velocity field and the strain rates in both devices were measured at different flow rates and compared with an ideal hyperbolic stagnation point flow. The cross-slot microchannel was found to be a better experimental device than the miniature four-roll mill for the purpose of confining micron-sized objects in a controlled stagnation point flow. This is mainly due to the difficulty of maintaining a fixed location for the stagnation point within one micron in the miniature four-roll mill and achieving high strain rates beyond 10 s − 1 . However, with no moving parts, the cross-slot microchannel was found to maintain a steady flow, with the stagnation point varying less than one micron at a cross-junction of 400 × 400 μ m 2 , and was able to reach uniform strain rates up to 140 s − 1 .Keywords
This publication has 48 references indexed in Scilit:
- Hydrodynamic trap for single particles and cellsApplied Physics Letters, 2010
- An experiment on two aspects of the interaction between strain and vorticityJournal of Fluid Mechanics, 2001
- The kinematics of the four-roll millPhysics of Fluids A: Fluid Dynamics, 1993
- Deformation and breakup of viscoelastic drops in planar extensional flowsJournal of Non-Newtonian Fluid Mechanics, 1991
- Visualization of three-dimensional flow in a four-roll millExperiments in Fluids, 1990
- Viscoelastic Flows Through ContractionsAnnual Review of Fluid Mechanics, 1987
- An experimental investigation of drop deformation and breakup in steady, two-dimensional linear flowsJournal of Fluid Mechanics, 1986
- The stability of two-dimensional linear flows of an Oldroyd-type fluidJournal of Non-Newtonian Fluid Mechanics, 1985
- The stability of two-dimensional linear flowsThe Physics of Fluids, 1984
- The formation of emulsions in definable fields of flowProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1934