Adaptive Beamforming Based on Linear Array Antenna for 2.3 GHz 5G Communication using LMS Algorithm

Authors:

Abstract
In this paper, the results of the adaptive beam- forming with beam pattern synthesis on a linear array antenna applied to 5G communication with operating frequency is 2.3 GHz, specifically at 2.330 GHz using the Least Mean Square (LMS) algorithm are presented. What is meant by adaptive beamforming here is the form of the result of beam pattern synthesis, capable of adapting by directing the main beam towards the desired channel (we call Signal of Interest or SOI), and at the same time suppressing as low as possible of interference channel (we call Signal of Not Interest or SNOI) directions. The comparison between the signal levels of SOI and SNOI from the synthesis of the pattern, will produce a parameter that represents the performance of the system, and is called the Signal of Interference Ratio (SIR). Simulations were carried out to evaluate the performance of the system on the effect of the number of element arrays, with SOI directions varying from 0°, 20°, 40°, and 50° with SNOI=60°, with a convergence constant value of the LMS algorithm 0.001, and a minimum threshold value of 40 dB SIR. From the simulation results, it is concluded, if the angle difference between SOI and SNOI is relatively far (60°, 40° and 20°), then the adaptive beamforming successfully places these signals in the predetermined SOI and SNOI directions, with relatively high SIR, at above the threshold value of 40 dB. The smaller the difference between SOI and SNOI anther angles, the smaller the resulting SIR value. When the angle between SOI and SNOI is 10°, the adaptive beamforming formation does not succeed in placing the signal at the specified angle, and the SIR threshold value is smaller than the 40 dB threshold value.

This publication has 5 references indexed in Scilit: