Hydrogen Utilization as a Plasma Source for Magnetohydrodynamic Direct Power Extraction (MHD-DPE)

Author:
Open Access
Publisher website
Google Scholar
Abstract
This study explores the suitability of hydrogen-based plasma in direct power extraction (DPE) as a non-conventional electricity generation method. We apply computational modeling and principles in physics and chemistry to estimate different thermal and electric properties of a water-vapor/nitrogen/cesium-vapor (H 2 O/N2/Cs) gas mixture with different levels of cesium (Cs) at a fixed temperature of 2300 K (2026.85 °C). This gas mixture and temperature are selected because they resemble the stoichiometric combustion of hydrogen with air, followed by the addition of the alkali metal element cesium to allow ionization, thus converting the gas mixture into electrically conducting plasma. We vary the cesium mole fraction in the gas mixture by two orders of magnitude, from a minute amount of 0.0625% (1/1600) to a major amount of 16% (0.16). We use these results to further estimate the theoretical upper limit of the electric power output from a unit volume of a high-speed magnetohydrodynamic (MHD) channel, with the plasma accelerated inside it to twice the local speed of sound (Mach number 2) while subject to an applied magnetic field of 5 T (5 teslas). We report that there is an optimum cesium mole fraction of 3%, at which the power output is maximized. Per 1 m 3 of plasma volume, the estimated theoretical electric power generation at 1 atm (101.325 kPa) pressure of the hydrogen-combustion mixture is extraordinarily high at 360 MW/m 3 , and the plasma electric conductivity is 17.5 S/m. This estimated power generation even reaches an impressive level of 1.15 GW/m 3 (11500 MW/m 3 ) if the absolute pressure can be decreased to 0.0625 atm (6.333 kPa), at which the electric conductivity exceeds 55 S/m (more than 10 times the electric conductivity of seawater).
All Related Versions

This publication has 229 references indexed in Scilit: