A Tunable RF MEMS Inductor on Silicon Incorporating an Amorphous Silicon Bimorph in a Low-Temperature Process
Authors:
- 23 October 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 27 (11) , 905-907
Abstract
A novel tunable radio frequency microelectromechanical system inductor based on the bimorph effect of an amorphous silicon (a-Si) and aluminum structural layer is presented. The outer turns of the inductor have a vertical height of 450 mum when no voltage is applied. A 32% tuning range with high inductance (5.6-8.2 nH) is achieved by the application of a voltage, with the structure completely flattening at 2 V. With no actuation, the peak quality factor is 15, and the self-resonance frequency is 7 GHz. The fact that the device is fabricated on Si in a low-temperature (150 degC) process enhances the potential for system integrationKeywords
This publication has 17 references indexed in Scilit:
- Tunable radio frequency MEMS inductors with thermal bimorph actuatorsJournal of Micromechanics and Microengineering, 2005
- Variable MEMS-based inductors fabricated from PECVD silicon nitride2005
- A low cost wafer-level MEMS packaging technology2005
- RF MEMS for ubiquitous wireless connectivity. Part II. ApplicationIEEE Microwave Magazine, 2004
- Development of three-dimensional inductors using plastic deformation magnetic assembly (PDMA)IEEE Transactions on Microwave Theory and Techniques, 2003
- CMOS-compatible surface-micromachined suspended-spiral inductors for multi-GHz silicon RF ICsIEEE Electron Device Letters, 2002
- Self-assembling MEMS variable and fixed RF inductorsIEEE Transactions on Microwave Theory and Techniques, 2001
- Physical modeling of spiral inductors on siliconIEEE Transactions on Electron Devices, 2000
- High Q spiral-type microinductors on silicon substratesIEEE Transactions on Magnetics, 1999
- A monolithic variable inductor network using microrelays with combined thermal and electrostatic actuationJournal of Micromechanics and Microengineering, 1999