Ballistic impact behaviour of stiffened aluminium plates for gas turbine engine containment system
Authors:
- 3 February 2017
- journal article
- research article
- Published by Taylor & Francis in International Journal of Crashworthiness
- Vol. 22 (5) , 467-478
Abstract
Stiffened metal fan casing was extensively utilised for containment system in fan blade out events. In this paper, ballistic impact tests were carried out on aluminium alloy plate with different types of stiffener. The ballistic limits and energy absorption of each type plate were determined and compared. The transformation of damage mechanism and failure modes of stiffened plate were also addressed. It is concluded that the failure modes of flat plate and stiffened plates are mainly petaling failure, and the shear plugging failure becomes evident with the increase of impact velocity. The ballistic limit of stiffened plate increase 25% higher than the flat plate and the critical impact energy is lifted by 56.3%–62.5% correspondingly with only 8.9% weight increment. There are very small differences of ballistic limit between different types of stiffened plates. The existence of the stiffened bar alters the failure modes and the cracking propagation direction decreases the deflection of target under impact, and further restricts the cracking propagation along the longitudinal direction. For L-type stiffened plate and T-type stiffened plate, the failure modes are dominated by ripping and petaling failure, while the shear plugging failure mode is more obvious for I-type stiffened plate.Keywords
Funding Information
- National Natural Science Foundation of China (51575262)
- China Postdoctoral Science Foundation funded project (2015M571754)
- Postdoctoral Science Foundation funded Project of Jiangsu Province (1402029)
This publication has 27 references indexed in Scilit:
- Rotordynamic analysis of asymmetric turbofan rotor due to fan blade-loss event with contact-impact rub loadsJournal of Sound and Vibration, 2013
- The analysis and simulation of welded stiffener plates subjected to localised blast loadingInternational Journal of Impact Engineering, 2010
- Impact characteristics of stiffened plates penetrated by sub-ordnance velocity projectilesJournal of Constructional Steel Research, 2008
- Aeroengine turbine blade containment tests using high-speed rotor spin testing facilityAerospace Science and Technology, 2006
- Experimental and numerical studies on the response of quadrangular stiffened plates. Part II: localised blast loadingInternational Journal of Impact Engineering, 2005
- Experimental and numerical studies on the response of quadrangular stiffened plates. Part I: subjected to uniform blast loadInternational Journal of Impact Engineering, 2005
- Effects of heat treatment on the ballistic impact properties of Inconel 718 for jet engine fan containment applicationsInternational Journal of Impact Engineering, 2001
- Numerical simulations for high-energy impact of thin platesInternational Journal of Impact Engineering, 2001
- Non-ideal projectile impact on targetsInternational Journal of Impact Engineering, 1999
- The deformation and tearing of thin square plates subjected to impulsive loads—An experimental studyInternational Journal of Impact Engineering, 1996