Injection molding of long sisal fiber–reinforced polypropylene: Effects of compatibilizer concentration and viscosity on fiber adhesion and thermal degradation
- 28 February 2005
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 45 (4) , 613-621
Abstract
A two‐step process was used to obtain long sisal fiber‐polypropylene (SF/PP)–reinforced thermoplastic composites, using maleic anhydride grafted polypropylene (MA‐g‐PP) as a compatibilizer. At a first stage, modified polypropylenes (mPP) were used for an extrusion impregnation process, for the preparation of composite pellets containing about 70 wt% of SF. SF/mPP pellets with a large aspect ratio were prepared by continuous extrusion impregnation of a continuous SF yarn, using a single screw extruder and an adequate impregnation die. The mPP used were MA‐g‐PP and regular polypropylene (PP), modified by reaction with different amounts of an organic peroxide. The composite pellets were thus dry blended with regular PP pellets in an injection machine hopper, and injection molded to obtain composite tensile specimens with a minimum quantity of modified polypropylene, minimum fiber breakage and thermal degradation, and excellent mechanical properties. It is shown that the fiber breakage is reduced to a minimum, even for recycled composites, due to the presence of the low‐viscosity polymer layer wetting the SF fibers. The bulk composite effective viscosity and the fiber breakage extent and thermal degradation during the injection‐molding step are found to be closely related. Blending with much less expensive mPP at the impregnation stage optimizes the amount of expensive MA‐g‐PP. POLYM. ENG. SCI., 45:613–621, 2005. © 2005 Society of Plastics EngineersKeywords
Funding Information
- ANPCyT (PICT 99-14-07247)
This publication has 14 references indexed in Scilit:
- A low‐cost, low‐fiber‐breakage, injection molding process for long sisal fiber reinforced polypropylenePolymer Engineering & Science, 2004
- An investigation on the processing of sisal fibre reinforced polypropylene compositesComposites Science and Technology, 2003
- Manufacturing sisal–polypropylene composites with minimum fibre degradationComposites Science and Technology, 2003
- Relationship between processing and properties of biodegradable composites based on PCL/starch matrix and sisal fibersPolymer Composites, 2001
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000
- Interfaces in polyolefin/cellulosic fiber composites: Chemical coupling, morphology, correlation with adhesion and aging in moisturePolymer Composites, 1998
- Biofiber‐reinforced polypropylene compositesPolymer Engineering & Science, 1997
- The nature of adhesion in composites of modified cellulose fibers and polypropyleneJournal of Applied Polymer Science, 1991
- Measurements of residence time distribution for the peroxide degradation of polypropylene in a single‐screw plasticating extruderJournal of Applied Polymer Science, 1989
- High Performance Thermoplastic Matrix CompositesJournal of Thermoplastic Composite Materials, 1988