Preparation and Photocatalytic Properties of TiO 2 ‐Al 2 O 3 Composite Loaded Catalysts

Authors:

Abstract
This paper presents an experimental approach to study catalytic effects of Fe 3+ modified nanometer titanium dioxide (TiO 2 ) loaded on aluminium oxide (Al 2 O 3 ). Sol‐gel method was used to prepare modified TiO 2 loaded on carrier. Purification tests were conducted in a self‐developed instrument to study catalytic effects of TiO 2 loaded on Al 2 O 3 with different contents through degradation rate. The modification mechanism was studied by scanning electron microscope (SEM). Results showed that loading on Al 2 O 3 improved photocatalytic effect of TiO 2 modified with Fe 3+ . The best photocatalytic effect was achieved under catalytic action of Al 2 O 3 loaded with 10% TiO 2 composite; the degradation rates were 6.9%, 13.8%, 21.4%, and 49.2%, respectively, 0.7%, 3.9%, 1.3%, and 15.1% larger than unloaded TiO 2 . SEM results of four catalysts showed that nanometer TiO 2 was coated in form of grain on the surface of Al 2 O 3 . The optimal loading content was 10% at which the nanometer TiO 2 grains were coated on the surface of Al 2 O 3 uniformly.

This publication has 11 references indexed in Scilit: