Mechanical Study of a Superconducting 28-GHz Ion Source Magnet for FRIB
- 24 February 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (5) , 1-6
Abstract
The superconducting electron cyclotron resonance (ECR) source magnet for the facility for rare isotope beams at Michigan State University was designed and built by the Superconducting Magnet Group at Lawrence Berkeley National Laboratory (LBNL) in 2017. The 28 GHz NbTi ion source magnet features a sextupole-in-solenoids configuration which is comparable to the VENUS ECR magnet operated at LBNL. However, the mechanical design of this magnet utilizes a shell-based support structure which allows fine adjustments to the sextupole preload and reversibility of the magnet assembly process. The magnet has been assembled and tested to operational currents at LBNL. This paper describes the mechanical analyses performed to estimate the sextupole's and solenoids' preloads. We will report on the 3-D finite element analysis during room temperature assembly, cool-down, and magnet excitation, and then describe the magnet preload operations. Finally, we will describe the performance of the support structure during the quench training.Keywords
Funding Information
- U.S. Department of Energy
- Office of Science (DE-AC02-05CH11231, DE-SC0000661)
This publication has 8 references indexed in Scilit:
- Assembly Tests of the First Nb3Sn Low-Beta Quadrupole Short Model for the Hi-Lumi LHCIEEE Transactions on Applied Superconductivity, 2016
- Design of a Superconducting 28 GHz Ion Source Magnet for FRIB Using a Shell-Based Support StructureIEEE Transactions on Applied Superconductivity, 2014
- 3-D Mechanical Analysis of the ECR Source Magnet for FRIBIEEE Transactions on Applied Superconductivity, 2014
- Mechanical Behavior of HQ01, a ${\hbox{Nb}}_{3}\hbox{Sn}$ Accelerator-Quality Quadrupole Magnet for the LHC Luminosity UpgradeIEEE Transactions on Applied Superconductivity, 2011
- Mechanical Performance of the LARP Nb$_{3}$Sn Quadrupole Magnet LQS01IEEE Transactions on Applied Superconductivity, 2011
- Test results of TQS03: A LARP shell-based Nb3Sn quadrupole using 108/127 conductorJournal of Physics: Conference Series, 2010
- The use of pressurized bladders for stress control of superconducting magnetsIEEE Transactions on Applied Superconductivity, 2001
- Magnet system for an ECR ion sourceIEEE Transactions on Applied Superconductivity, 2000