Surface Acoustic Wave Sensors for Temperature and Strain Measurements
Authors:
- 7 September 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
Surface acoustic wave (SAW) technology has received considerable attention for harsh environment applications. The ultimate goal of our research is to develop a SAW sensor system for temperature and pressure sensing in the cryogenic environment. In this research, we performed a Finite Element (FE) analysis to simulate the temperature sensitivity of the 128o YX-cut Lithium Niobate (LiNbO3)-based SAW sensor using COMSOL Multiphysics. The fabricated SAW sensors were applied to measure the temperature from 30°C to 80°C and the strain at room temperature. The results have shown that the temperature coefficient of the delay (TCD) at room temperature is around 74.4 ppm/°C. The measured TCD of the temperature at room temperature matches the simulation result, which is 72.37 ppm/°C. The measured strain coefficient of delay (SCD) is 0.38ppm/με at room temperature.Keywords
Funding Information
- NASA (NNXl 7CS18P)
- U.S. Department of Energy
- Office of Basic Energy Sciences (DE-SC0012704)
This publication has 5 references indexed in Scilit:
- Surface Acoustic Wave (SAW) Sensors for Cryogenic Temperature and Strain Sensing2018
- Flexible surface acoustic wave strain sensor based on single crystalline LiNbO3 thin filmApplied Physics Letters, 2018
- Analysis of the sensitivity to pressure and temperature of a membrane based SAW sensorInternational Journal of Smart and Nano Materials, 2017
- Wireless surface acoustic wave radio frequency identification (SAW-RFID) sensor system for temperature and strain measurements2012
- Temperature Dependence of the Elastic, Piezoelectric, and Dielectric Constants of Lithium Tantalate and Lithium NiobateJournal of Applied Physics, 1971