Porous Superabsorbent Hydrogel Composites: Synthesis, Morphology and Swelling Rate
- 29 June 2004
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 289 (7) , 653-661
Abstract
Summary: Novel porous hydrogel composites with very high swelling capacity and enhanced rate of water absorption were synthesized in aqueous media at room temperature under normal atmospheric conditions. The porosity was induced through either foaming conducted in the course of polymerization or non‐solvent dewatering of the as‐synthesized gels. Kaolin was incorporated as an inorganic component in the polymerization process. The foaming technique was used to form porosity using three systems of different porogens (porosity generators), i.e. sodium bicarbonate, acetone and their combination. The as‐synthesized gels were dried through oven drying and non‐solvent dewatering. Morphology and swelling rate of the superabsorbent hydrogel composites (SHCs) were studied versus either the porogen system or the drying method. It was found that the simultaneous polymerization‐foaming technique had great influence on the improvement of porosity, morphology of the porous structure and the rate of water absorption. It was also shown that the drying procedure had remarkable influence on preserving the preformed porosity. Methanol as a dewatering solvent produced SHCs with higher porosity and swelling rate in comparison with the porosity of the hydrogels dewatered in acetone. Our invented methodology including simultaneous polymerization and foam formation using dual‐porogen system and the subsequent methanol‐dewatering approach was found to be the most efficient, highly practical, and cost‐effective route for preparing improved superabsorbing hydrogel materials. magnified imageKeywords
This publication has 23 references indexed in Scilit:
- Superabsorbent hydrogel compositesPolymers for Advanced Technologies, 2003
- Effects of Clay Content on the Properties of Nanocomposite Hydrogels Composed of Poly(N-isopropylacrylamide) and ClayMacromolecules, 2002
- Study on foaming water‐swellable EPDM rubberJournal of Applied Polymer Science, 2002
- Influence of the COOH and COONa groups and crosslink density of poly(acrylic acid)/montmorillonite superabsorbent composite on water absorbencyPolymer International, 2001
- Preparation and characterization of water-swellable natural rubbersJournal of Applied Polymer Science, 2001
- Preparation and NMR characterization of superporous hydrogels (SPH) and SPH compositesPolymer, 2000
- Pore structure of superporous hydrogelsPolymers for Advanced Technologies, 2000
- Modifying acrylic‐based superabsorbents. I. Modification of crosslinker and comonomer natureJournal of Applied Polymer Science, 1994
- Porogens in the preparation of microporous hydrogels based on poly(ethylene oxides)Biomaterials, 1993
- Synthesis and characterization of thermally reversible macroporous poly(N‐isopropylacrylamide) hydrogelsJournal of Polymer Science Part A: Polymer Chemistry, 1992