An explanation of warp knitted fabric deformation under uni-axial tension by a novel index as shape ratio
- 3 April 2016
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (4) , 500-506
Abstract
Although the Poisson’s ratio (PR) can predict the deformation of engineering materials under uniaxial tension, but seems that it cannot predict well the deformation of structures such as fabrics. It can be attributed to the lack of continuity among constituent elements that leads to some distortion of them during tension. Therefore, the PR is not a suitable tool to explain precisely the deformation of structures such as fabrics. For this reason, a new geometrical index was defined to quantify the deformation of fabrics in order to use instead of PR. This index named shape ratio is obtained by division of the variation of squared perimeter to the area of a printed square on the fabric under uniaxial tension. To check the defined index, warp-knitted fabrics with various structures such as Tricot, Locknit, and Three- and Four-needle satin were produced and tested using tensile tester. The results show that shape ratio can predict the deformation of warp-knitted fabrics as an orthotropic structure rather than the PR.Keywords
Funding Information
- Amirkabir University of Technology (40/558)
This publication has 19 references indexed in Scilit:
- Analysis of warp knitted fabric structure. Part V: experimental study on the initial modulus of warp knitted fabricsThe Journal of the Textile Institute, 2013
- Analysis of warp-knitted fabric structure part IV: modeling the initial Poisson’s ratio in elastic deformation regionThe Journal of the Textile Institute, 2012
- The Poisson Ratio and Modulus of Elastic Knitted FabricsTextile Research Journal, 2010
- Ideal stitch model for interlock-knitted fabricThe Journal of the Textile Institute, 2008
- Movement of fibers in assembliesThe Journal of the Textile Institute, 2006
- Modelling the elastic properties of knitted-fabric-reinforced compositesComposites Science and Technology, 1996
- 13—THE BIAXIAL LOAD-EXTENSION BEHAVIOUR OF A MODEL OF PLAIN WEFT-KNITTING—PART IThe Journal of the Textile Institute, 1978
- 39—AN ENERGY ANALYSIS OF WOVEN-FABRIC MECHANICS BY MEANS OF OPTIMAL-CONTROL THEORY PART I: TENSILE PROPERTIESThe Journal of the Textile Institute, 1977
- 32—THE MECHANICS OF AN IDEALIZED WEFT-KNITTED STRUCTUREThe Journal of the Textile Institute, 1976
- 43—The Geometry of a Plain Knitted LoopJournal of the Textile Institute Transactions, 1955