Two-Dimensional Anisotropic Model of YBCO Coated Conductors
Authors:
- Marco CasaliMCMarco Casali
- Marco BreschiMBMarco Breschi
- Pier Luigi RibaniPRPier Luigi Ribani
- 23 July 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 25 (1) , 1-12
Abstract
The ability of second-generation YBCO coated conductor (CC) tapes to transport high current densities at high temperature, i.e., up to 77 K, and at very high magnetic fields, i.e., above 20 T, are pushing the use of these tapes in various applications, from magnet to power system technologies. An accurate study of their quench behavior is mandatory for the design and safe use of cables and magnets manufactured with this ceramic superconducting material. A new 2-D finite-element method (FEM) numerical quench model, which is called anisotropic model of YBCO CCs, was built for this purpose in the COMSOL Multiphysics environment. One of the most difficult issues in the modeling of the YBCO tapes with the FEM is their high aspect ratio due to the very small thickness of the YBCO layer, about 1 μm. In the model developed, the problem of the high aspect ratio of the tape is tackled by multiplying the tape thickness by a constant factor and then compensating the heat and electrical balance equations through the introduction of material anisotropic properties. The FEM model is validated by comparison with literature experimental data on minimum quench energy and normal zone propagation velocity.Keywords
This publication has 24 references indexed in Scilit:
- Influence of Buffer Layer Surface Morphology on YBCO Critical Current Density Deposited on NiW TapesIEEE Transactions on Applied Superconductivity, 2010
- Self-field quench behaviour of YBa2Cu3O7−δcoated conductors with different stabilizersSuperconductor Science and Technology, 2009
- Modeling of Quench Limit for Steady State Heat Deposits in LHC MagnetsIEEE Transactions on Applied Superconductivity, 2008
- Transient Behaviour of Superconducting Magnet Systems of Fusion Reactor ITER during Safety DischargeModelling and Simulation in Engineering, 2008
- Quench Behavior of YBa$_{2}$Cu$_{3}$O$_{7}$ Coated Conductor With AC Transport CurrentIEEE Transactions on Applied Superconductivity, 2007
- A Criterion for Determining Stabilizer Thickness of YBCO Coated Conductors Based on Coil ProtectionIEEE Transactions on Applied Superconductivity, 2007
- Theoretical explanation of the non-equipotential quench behaviour in Y–Ba–Cu–O coated conductorsSuperconductor Science and Technology, 2007
- Normal Zone Initiation and Propagation in Y-Ba-Cu-O Coated Conductors With Cu StabilizerIEEE Transactions on Applied Superconductivity, 2005
- Electrical resistivity of copper, gold, palladium, and silverJournal of Physical and Chemical Reference Data, 1979
- Low-temperature resistivity of silverJournal of Physics F: Metal Physics, 1979