A New Technique of Grouting to Prevent Water–Sand Mixture Inrush inside the Mine Panel—A Case Study
Open Access
Abstract
Water–sand mixture inrush generally poses a significant threat to the safe operation of the quarry of coal mines. Therefore, proactive management initiatives are essential to enhance the impact resulting from mining operations. A novel approach involving grouting into the unconsolidated sand aquifer and the weathered zone was initially executed in the 1010-1 panel of the Wugou coal mine in Anhui Province, China. Considering the hydrogeological conditions of the study area, over 70 thousand tons of cement and fly ash were injected through 42 boreholes. Sampling, laboratory tests, similar materials model simulations, and numerical simulations of the trending and dipping profiles were all employed to elucidate the evolution and characteristics during the progression of the No. 10 coal seam. The outcomes illustrated that the grouting execution had transformed the structure of the porous media, weakened the watery media, and intensified the mechanical strength of the No. 4 aquifer and the weathering zone. This transformation proved beneficial in reducing the heights of the caving zone and water-conductive fracture zone, leaving more coal–rock pillars for safety. Twenty-seven underground detection drill holes and whole-space 3D resistivity exploration were adopted to verify its transformed property of low water content. During the mining process, the height of the caving zone at 19.70 m was measured through inter-hole parallel electrical detection. The pressure of hydraulic supports in the grouted area did not exceed the rated working pressure during mining. All of these findings highlight the significant impact of grouting in this study area. The successive safe mining of the 1010-1 panel demonstrates that grouting can be used to prevent water–sand mixture inrush during mining operations.Keywords
Funding Information
- National Natural Science Foundation of China (42130706, 42202268)
This publication has 42 references indexed in Scilit:
- Failure Mechanism and Movement Characteristics of Overlying Strata in Longwall Mining Face with Thick AquiferRock Mechanics and Rock Engineering, 2024
- Stress Evolution of Repeated Mining Based on the Double-Yield Model in Multiple Coal SeamRock Mechanics and Rock Engineering, 2024
- Study on the failure characteristics of overburden and the evolution law of seepage field in deep buried thick coal seam under aquifersNatural Hazards, 2023
- Rock Strata Failure Behavior of Deep Ordovician Limestone Aquifer and Multi-level Control Technology of Water Inrush Based on Microseismic Monitoring and Numerical MethodsRock Mechanics and Rock Engineering, 2022
- Experimental Investigation on the Transport Behavior of a Sand/Mud/Water Mixture Through a Mining-Induced Caving ZoneMine Water and the Environment, 2022
- Water Seepage Mapping in an Underground Coal-Mine Barrier Using Self-potential and Electrical Resistivity TomographyMine Water and the Environment, 2021
- Geophysical and analytical determination of overstressed zones in exploited coal seam: a case studyActa Geophysica, 2021
- A new analytical method for determination of discharge duration in tunnels subjected to groundwater inrushBulletin of Engineering Geology and the Environment, 2021
- A novel dynamic predictive method of water inrush from coal floor based on gated recurrent unit modelNatural Hazards, 2020
- Experimental study on water and sand inrush of mining cracks in loose layers with different clay contentsBulletin of Engineering Geology and the Environment, 2020