Design and test of a simple fast electromagnetic inductive gas valve for planar pulsed inductive plasma thruster
Authors:
- 1 October 2017
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 88 (10) , 105101
Abstract
In support of our planar pulsed inductive plasma thruster research, a fast electromagnetic inductive valve for a gas propellant injection system has been built and tested. A new and important design feature is the use of a conical diaphragm as the action part, which greatly contributes to the virtue of simplicity for adopting the resultant force of the diaphragm deformation as the closing force. An optical transmission technique is adopted to measure the opening and closing characters of the valve while the gas throughput is determined by measuring the pressure change per pulse in a test chamber with a capacitance manometer. The experimental results revealed that the delay time before the valve reaction is less than 40 μs, and the valve pulse width is no longer than 160 μs full width at half maximum. The valve delivers 0-2.5 mg of argon gas per pulse varied by adjusting the drive voltage and gas pressure.Keywords
This publication has 17 references indexed in Scilit:
- Designing of the massive gas injection valve for the joint Texas experimental tokamakReview of Scientific Instruments, 2014
- Design and operation of a fast electromagnetic inductive massive gas injection valve for NSTX-UReview of Scientific Instruments, 2014
- Characterization of the COBRA triple-nozzle gas-puff valve using planar laser induced fluorescenceAIP Conference Proceedings, 2014
- Architecture, implementation, and testing of a multiple-shell gas injection system for high current implosions on the Z acceleratorReview of Scientific Instruments, 2013
- Comprehensive Review of Planar Pulsed Inductive Plasma Thruster Research and TechnologyJournal of Propulsion and Power, 2011
- A new disruption mitigation valve (DMV) and gas flow in guiding tubes of different diameterNuclear Fusion, 2011
- Main characteristics of the fast disruption mitigation valveReview of Scientific Instruments, 2007
- Development of a fast valve for mitigating disruptions in tokamaksReview of Scientific Instruments, 2002
- Valve and nozzle design for injecting a shell-on-shell gas puff load into a z pinchReview of Scientific Instruments, 2000
- Effect of Initial Conditions on Gas-Puff Z-Pinch Dynamics1994