Optimal multiobjective design of hybrid active power filters considering a distorted environment
- 1 February 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 61 (1) , 107-114
Abstract
The development of new passive, active, and hybrid filtering techniques is important; and the issues of higher quality, reduced complexity, higher efficiency, and lower cost are important conditions that need to be addressed with regard to the expected stringent trends in power quality obligations. This paper suggests a new approach for the optimal sizing of hybrid active power filter (HAPF) parameters, which is presented for three-phase industrial power systems. Hybrid filter topology can be used to compensate harmonic currents, as well as for power factor corrections, without concern for importing and exporting harmonics, or simply the series and parallel resonance that may occur. The new trend in harmonic power filter design is not to obtain the best solution from a single objective optimization but to obtain a good compromise solution accomplished under other conflicting objectives. Fortran Feasible Sequential Quadratic Programming is used to determine the proposed filter optimal sizing to minimize the total voltage harmonic distortion as the main objective function, where maintaining the load power factor at an acceptable limit is desired. If the total harmonic voltage distortion achieves the specified goal, then the objective is redirected into minimizing the resultant voltage and current total harmonic distortions. The optimal design of the HAPF is analyzed by means of three case studies.Keywords
This publication has 20 references indexed in Scilit:
- On the Limit of the Output Capacitor Reduction in Power-Factor Correctors by Distorting the Line Input CurrentIEEE Transactions on Power Electronics, 2012
- Current Control for an Indirect Matrix Converter With Filter Resonance MitigationIEEE Transactions on Industrial Electronics, 2011
- Hybrid Selective Harmonic Elimination PWM for Common-Mode Voltage Reduction in Three-Level Neutral-Point-Clamped Inverters for Variable Speed Induction DrivesIEEE Transactions on Power Electronics, 2011
- Exploring Inherent Damping Characteristic of LCL-Filters for Three-Phase Grid-Connected Voltage Source InvertersIEEE Transactions on Power Electronics, 2011
- Comparison of Shunt-passive and Series-passive Filters for DC Drive LoadsElectric Power Components and Systems, 2010
- A hybrid compensation system comprising hybrid power filter and AC power capacitorInternational Journal of Electrical Power & Energy Systems, 2006
- Optimal multiobjective planning of large-scale passive harmonic filters using hybrid differential evolution method considering parameter and loading uncertaintyIEEE Transactions on Power Delivery, 2005
- A new approach for voltage harmonic distortion minimizationElectric Power Systems Research, 2004
- Implementation and performance of cooperative control of shunt active filters for harmonic damping throughout a power distribution systemIEEE Transactions on Industry Applications, 2003
- A new approach to harmonic compensation in power systems-a combined system of shunt passive and series active filtersIEEE Transactions on Industry Applications, 1990