Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by thermally induced substrate curvature method
Authors:
- M. G. BeghiMBM. G. Beghi
Preprint
Abstract
The in plane coefficient of thermal expansion (CTE) and the residual stress of nanostructured W based coatings are extensively investigated. The CTE and the residual stresses are derived by means of an optimized ad-hoc developed experimental setup based on the detection of the substrate curvature by a laser system. The nanostructured coatings are deposited by Pulsed Laser Deposition. Thanks to its versatility, nanocrystalline W metallic coatings, ultra-nano-crystalline pure W and W-Tantalum coatings and amorphous-like W coatings are obtained. The correlation between the nanostructure, the residual stress and the CTE of the coatings are thus elucidated. We find that all the samples show a compressive state of stress that decreases as the structure goes from columnar nanocrystalline to amorphous-like. The CTE of all the coatings is higher than the one of the corresponding bulk W form. In particular, as the grain size shrinks, the CTE increases from 5.1 10$^{-6}$ K$^{-1}$ for nanocrystalline W to 6.6 10$^{-6}$ K$^{-1}$ in the ultra-nano-crystalline region. When dealing with amorphous W, the further increase of the CTE is attributed to a higher porosity degree of the samples. The CTE trend is also investigated as function of materials stiffness. In this case, as W coatings become softer, the easier they thermally expand.Keywords
All Related Versions
This publication has 41 references indexed in Scilit:
- Measurement of residual stress on TiN/Ti bilayer thin films using average X-ray strain combined with laser curvature and nanoindentation methodsMaterials Chemistry and Physics, 2017
- Amorphous, ultra-nano- and nano-crystalline tungsten-based coatings grown by Pulsed Laser Deposition: mechanical characterization by Surface Brillouin SpectroscopyMaterials & Design, 2016
- Estimation of boron diffusion induced residual stress in silicon by wafer curvature techniqueMaterials Letters, 2016
- Thermal annealing and exposure to divertor-like deuterium plasma of tailored tungsten oxide coatingsJournal of Nuclear Materials, 2015
- Coefficient of thermal expansion measurements for freestanding nanocrystalline ultra-thin gold filmsInternational Journal of Precision Engineering and Manufacturing, 2014
- The impact of thermal fatigue and carbidization on the W coatings deposited on CFC tiles for the ITER-like Wall project at JETFusion Engineering and Design, 2013
- The mechanical properties of a nanocrystalline Al2O3/a-Al2O3 composite coating measured by nanoindentation and Brillouin spectroscopyActa Materialia, 2013
- Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and modelActa Materialia, 2011
- Investigation of the coefficient of thermal expansion in nanocrystalline diamond filmsDiamond and Related Materials, 2009
- The structure and properties of nanocrystalline Fe78B13Si9 alloyJournal of Non-Crystalline Solids, 1992