Experiments on Convection Heat Transfer Along a Vertical Flat Plate Between Pools with Different Temperatures
Authors:
- 1 September 1992
- journal article
- research article
- Published by Taylor & Francis in Nuclear Technology
- Vol. 99 (3) , 386-396
Abstract
To evaluate the heat removal capability of an external water wall-type containment vessel, which is a passive system for containment cooling, thermal-hydraulic behavior in the suppression and outer pools has been examined experimentally. The following results are obtained: A thermal stratification boundary, which separates the pools into an upper high-temperature region and a lower low-temperature region, is observed just below the vent outlet.The natural-convection heat transfer coefficients (HTCs) for the downward and upward flows that appear inside and outside the primary containment vessel wall are measured. These values can be expressed by Nu = 0.13Ra1/3.The condensation HTCs in the presence of non-condensable gas, which affect heat transfer between the wet well and the outer pool, are measured along the long wall. The vertical variations of the condensation HTCs are within 10% of the averaged coefficients, and the averaged coefficients can be expressed by hm = 0.43(ma/ms)-0.8, where hm (kW/m...Keywords
This publication has 3 references indexed in Scilit:
- Thermal-Hydraulic Characteristics and Heat Removal Capability of Containment Cooling System with External Water WallJournal of Nuclear Science and Technology, 1990
- Conceptual Design and Safety Characteristics of a Natural-Circulation Boiling Water reactorNuclear Technology, 1990
- Conceptual Design and Thermal-Hydraulic Characteristics of Natural Circulation Boiling Water ReactorsNuclear Technology, 1988