Role of analytical methods in verifying biodiesel upgrades: Emphasis on nanoparticle and acetone integration for enhanced performance, combustion, and emissions
Authors:
- 21 June 2024
- journal article
- research article
- Published by Wiley in Heat Transfer
- Vol. 53 (7) , 3730-3766
Abstract
This study aims to address critical challenges such as global warming and energy sustainability by targeting the reduction of high NOx emissions in diesel engines. The effects of acetone (AC) and magnesium oxide (MgO) nanoparticles (NPs) as additives in improving the physicochemical properties of biodiesel derived from renewable, nonedible Pistacia terebinthus oil, which is abundant in Turkey and has a high free fatty acid (FFA) content of 5.8%, were investigated. Due to the high FFA content, a two‐step (esterification followed by transesterification [TR]) method was used for biodiesel production. Additionally, a quantitative analysis of biodiesel obtained by both single (TR) and two‐step methods was performed to address a gap in the literature. The addition of AC and MgO NPs to B20 (80% diesel fuel and 20% biodiesel) fuel resulted in reductions in the rate of pressure rise, instantaneous energy release, cylinder pressure, mean gas temperature, and cumulative heat release rate. However, brake‐specific fuel consumption increased, and brake thermal efficiency decreased. Emissions analyses showed a reduction in CO emissions by 6.65% with AC and 2.10% with AC + MgO, and a reduction in NOx emissions by 41.64% with AC and 46.03% with AC + MgO. However, hydrocarbon emissions increased by 26.48%. The study highlights the synergistic benefits of AC and MgO additives in biodiesel, presenting a viable strategy for improving the environmental and performance metrics of biodiesel blends. It provides new insights into alternative fuel formulations.Keywords
All Related Versions
This publication has 91 references indexed in Scilit:
- Relative exergy and energy analysis of DI‐CI engine fueled with higher blend of Azadirachta indica biofuel with n‐butanol and NiO as fuel additivesEnvironmental Progress & Sustainable Energy, 2023
- Effect of compression ratio and injection timing on the performance of microalgae‐based biodiesel blendHeat Transfer, 2023
- Performance, combustion, and emission characteristics of on a diesel engine fuelled with hydrogen compressed natural gas and Kusum seed biodieselWaste Disposal & Sustainable Energy, 2023
- A comparative performance and emission investigation CI engine fuelled with neem oil esters with varying engine compression ratiosHeat Transfer, 2022
- Comparitive investigation of performance and emission features of methanol, ethanol, DEE, and nanopartilces as fuel additives in diesel‐biodiesel blendsHeat Transfer, 2020
- Emission reductions studies of a biodiesel engine using EGR and SCR for agriculture operations in developing countriesApplied Energy, 2015
- A new FTIR method to monitor transesterification in biodiesel production by ultrasonicationEnvironmental Chemistry Letters, 2013
- The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engineJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2013
- Flame instability analysis of diethyl ether-air premixed mixtures at elevated pressuresChinese Science Bulletin, 2010
- Improvement of biodiesel production based on the application of ultrasound: Monitoring of the procedure by FTIR spectroscopyJournal of the American Oil Chemists' Society, 2006