Influence of Deposition Time on Titanium Nitride (TiN) Thin Film Coating Synthesis Using Chemical Vapour Deposition
Open Access
Abstract
Titanium nitride (TiN) thin film coatings were grown over silicon (-type) substrate using the atmospheric pressure chemical vapour deposition (APCVD) technique. The synthesis process was carried out to evaluate the effect of deposition time on the physical and mechanical characteristics of TiN coating. Thin films grown over Si substrate were further characterised to evaluate the morphological properties, surface roughness and mechanical properties using a scanning electrode microscope (SEM), atomic force microscopy (AFM) and nanoindentation, respectively. EDS equipped with SEM showed the presence of Ti and N elements in considerable amounts. TiN morphology obtained from the SEM test showed small-sized particles on the surface along with cracks and pores. AFM results revealed that by increasing the deposition time, the surface roughness of the coating also increased. The nanomechanical properties such as nanohardness () and Young’s modulus (), etc., evaluated using the nanoindentation technique showed that higher deposition time led to an increase in and . Overall, it was observed that deposition time plays a vital role in the TiN coating deposition using the CVD technique.
Keywords
This publication has 45 references indexed in Scilit:
- Mechanical Behavior of TiN/TiC-n Multilayer Coatings and Ti(C,N) Multicomponent Coatings Produced by PACVDStrength of Materials, 2016
- The influence of ZrO 2 /20%Y 2 O 3 and Al 2 O 3 deposited coatings to the behavior of an aluminum alloy subjected to mechanical shockApplied Surface Science, 2015
- Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steelsApplied Surface Science, 2013
- Singular characteristics and unique chemical bond activation mechanisms of photocatalytic reactions on plasmonic nanostructuresNature Materials, 2012
- Celebrating the 100th anniversary of the Stoney equation for film stress: Developments from polycrystalline steel strips to single crystal silicon wafersThin Solid Films, 2009
- Chemical Vapor Deposition of TiAlN film by Using Titanium Tetrachloride, Dimethylethylamine Alane and Ammonia Gas for ULSI Cu Diffusion Barrier ApplicationJapanese Journal of Applied Physics, 2004
- Correlation between process parameters, microstructure and hardness of titanium nitride films by chemical vapor depositionSurface and Coatings Technology, 2004
- Texture formation in titanium nitride films prepared by chemical vapor depositionJournal of Applied Physics, 1996
- Atmospheric Pressure Chemical Vapor Deposition of Titanium Nitride from Tetrakis (diethylamido) Titanium and AmmoniaJournal of the Electrochemical Society, 1996
- A comparison of the tribological behaviour of several wear-resistant coatingsSurface and Coatings Technology, 1992