Structure–Property Relationship in High-Strength Aluminum Alloys/Stainless Steel Brazed Joints
Open Access
Abstract
In many industrial sectors, for example, aerospace, automotive and high-performance electronic industries, there is a significant need to join dissimilar materials. In the case of medium-strength aluminum alloys, joints are commonly manufactured using Al-Si brazing fillers with a melting temperature of 575 °C. In comparison to medium-strength aluminum alloys, high-strength aluminum alloys exhibit lower melting temperatures. Therefore, the joining possibilities are limited. Due to the lower melting temperature of about 500 °C, Al-Ag-Cu brazing fillers allow the joining of these alloys. In this study, high-strength aluminum alloys/stainless steel joints were produced via induction brazing and vacuum furnace brazing. The mechanical properties of the joints were determined using tensile shear tests as well as fatigue tests at ambient temperature. The joints produced via induction brazing at 520 °C without holding time reached a maximum tensile shear strength of 32 MPa. The joints failed in the braze metal close to the reaction zone. The joints brazed in the vacuum furnace at 540 °C for 10 min reached a maximum tensile shear strength of 18 MPa. The fractures occurred in the reaction zone, especially inside the Al7Fe2Si intermetallic layer. The thickness of the intermetallic layers as well as the reaction zone had a significant influence on the joining strength and the fracture mechanism of the brazed joints. The results of the fatigue tests showed that the joints brazed without holding time achieved the defined limited number of cycles of 1 × 107 at a stress amplitude of 4 MPa. For all the fatigue-tested samples, the fracture occurred in the braze metal, especially in the eutectic. Hence, the reaction zone does not significantly influence the fracture mechanism of high-strength aluminum alloy/stainless steel brazed joints during cyclic loading.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Klimaschutz and industrielle Gemeinschaftsforschung (21.016 BR, 491193532)
- Chemnitz University of Technology and by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (21.016 BR, 491193532)
This publication has 16 references indexed in Scilit:
- Arc Brazing of Aluminium, Aluminium Matrix Composites and Stainless Steel in Dissimilar JointsMetals, 2018
- Vacuum brazing of dissimilar tubular component of AA2219 and AISI 304 by a low melting Al-18Ag-20Cu-5Si-0.2Zn braze alloyJournal of Materials Processing Technology, 2018
- Joining of material compounds of aluminium matrix composites (AMC) by arc brazing using Al-Ag-Cu system filler alloyWelding in the World, 2017
- Microstructures in a ternary eutectic alloy: devising metrics based on neighbourhood relationshipsIOP Conference Series: Materials Science and Engineering, 2016
- Joining of Aluminum Matrix Composites and Stainless Steel by Arc BrazingMaterials Science Forum, 2015
- Joining of dissimilar materialsCIRP Annals, 2015
- Morphological characterization of the Al–Ag–Cu ternary eutecticInternational Journal of Materials Research, 2012
- Directional solidification of Al–Cu–Ag alloyApplied Physics A, 2009
- The Ag–Al–Cu systemJournal of Alloys and Compounds, 2005
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992