Optical properties and indentation hardness of thin-film acrylated epoxidized oil
- 1 February 2012
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 51 (2) , 025002-1-025002-9
Abstract
Epoxy acrylate has been widely used as optical resin for applications such as cladding, the core of a waveguide, and other photonic devices. In this study, sustainable resin from edible oil was used as an alternative to epoxy acrylate. Structural features and the transmission of planar thin-film resin from an ultraviolet-visible spectroscopy (UV-VIS) spectrometer were investigated upon UV exposure. It was found that high transmission still persists for all samples with and without an UV absorber for exposed and unexposed samples. The film was found to absorb strongly below 400 nm. A change in the cut-off wavelength was observed upon exposure. Thin-film hardness and its dynamic indentation in the load-unload mode with different test forces were evaluated. Vickers hardness and the elastic modulus were determined for unacrylated epoxidized soybean oil (ESO) and acrylated epoxidized soybean oil (AESO). It was found that the AESO has a higher Vickers hardness and elastic modulus than those of unacrylated thin film. The Vickers hardness and elastic modulus were found to increase as the applied test force increased. The refractive index, thickness, and modes present were characterized from a spin-coated planar thin film. The refractive index in the transverse electric mode (TE) and transverse magnetic mode (TM) were determined and compared for unacrylated and acrylated epoxidized oil.Keywords
Funding Information
- National University Malaysia-Universiti Kebangsaan Malaysia (UKM-AP-ICT-17-2009)
- Universiti Kebangsaan Malaysia (UKM-AP-ICT-17-2009)
- National University Malaysia-Universiti Kebangsaan Malaysia (01-01-02-SF0493)
This publication has 16 references indexed in Scilit:
- Liquid-crystal photonic applicationsOptical Engineering, 2011
- Measurement of Hardness and Young’s Modulus by Nanoindentation2006
- Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oilMaterials Science and Engineering: A, 2004
- Controlled refractive index of photosensitive polymer: towards photo-induced waveguide for near infrared wavelengthsOptics Communications, 2002
- Absorption and scattering in low-loss polymer optical waveguidesJournal of the Optical Society of America B, 2001
- Optical properties of nonlinear optical polymers: a method for calculationJournal of the Optical Society of America B, 1998
- High-electric-field poling of nonlinear optical polymersJournal of the Optical Society of America B, 1998
- Polymeric thermo-optic space switches for optical communicationsOptical Materials, 1998
- Epoxidized triglycerides as renewable monomers in photoinitiated cationic polymerizationChemistry of Materials, 1992
- Theory of Prism–Film Coupler and Thin-Film Light GuidesJournal of the Optical Society of America, 1970