Correlation analysis of tensile strength and chemical composition of basalt fiber roving
Authors:
- 13 December 2018
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 40 (7) , 2959-2966
Abstract
This article studies the correlation between the tensile strength and the chemical composition of basalt fiber roving and analyzes rovings with different chemical compositions to derive equations that predict the roving strength. The tensile properties of different types of basalt fiber roving that were impregnated with two types of resins were first tested, while the chemical compositions of the basalt fibers were analyzed. The functional roles played by different chemical constituents and their contributions to the tensile strength were analyzed and used to verify the correlation between the strength and the effective composition. A numerical method was used to derive equations to predict the strength of the basalt fibers. The results show that the tensile strengths of the impregnated basalt fiber roving vary from 2313 to 2714 MPa, depending on the manufacturers, and were 7–25% higher than that of E‐glass fiber roving. The chemical constituents of the basalt fibers play four different functional roles, network formers, network intermediates, network changers and network modifiers. Chemical composition groups are subsequently identified that have positive, negative and uncertain effects on the tensile strength. The weighting factors of the chemical composition are regressed, resulting in predictions for the tensile strength that are in good agreement with experimental measurements. The results from this study can be used to predict the strength of basalt fibers in basalt mineral analysis. POLYM. COMPOS., 40:2959–2966, 2019. © 2018 Society of Plastics EngineersKeywords
Funding Information
- National Science Foundation of China (NSFC. 51508277, 51678139)
This publication has 19 references indexed in Scilit:
- Fatigue performance of prestressed concrete beams using BFRP barsConstruction and Building Materials, 2017
- Chemical durability and performance of modified basalt fiber in concrete mediumConstruction and Building Materials, 2017
- Fatigue behavior of basalt fiber-reinforced polymer tendons under a marine environmentConstruction and Building Materials, 2017
- Effectiveness of basalt FRP tendons for strengthening of RC beams through the external prestressing techniqueEngineering Structures, 2015
- Enhancement of basalt FRP by hybridization for long-span cable-stayed bridgeComposites Part B: Engineering, 2013
- Numerical analysis of behaviour of concrete beams with external FRP tendonsConstruction and Building Materials, 2012
- Degradation of basalt fibre and glass fibre/epoxy resin composites in seawaterCorrosion Science, 2011
- Evaluation of FRP and hybrid FRP cables for super long-span cable-stayed bridgesComposite Structures, 2010
- Characteristics of basalt fiber as a strengthening material for concrete structuresComposites Part B: Engineering, 2005
- The influence of Mg substitution for Al on the properties of SiMeRE oxynitride glassesJournal of Non-Crystalline Solids, 2004