Carbon Nanofiber–Reinforced Cement-Based Materials
Authors:
- 1 January 2010
- journal article
- research article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2142 (1) , 114-118
Abstract
Fibers are incorporated into cementitious matrices to help control cracking by bridging and providing load transfer across cracks and pores. Typical reinforcement of concrete is usually provided at the macro- and microscales by using macrofibers and microfibers, respectively. Although microfibers delay the propagation of microcracks, they do not stop their initiation. Theory suggests that nanofibers delay the formation of nanocracks, thus requiring higher loads to initiate cracking, which improves the weak tensile strength of the cementitious matrix. In this paper, a detailed investigation of the effects of carbon nanofibers (CNFs) on the flexural strength and nanostructure of the cement matrix was conducted. An ultra-high-resolution field emission scanning electron microscope was used to investigate the morphology of the nanocomposites. Nanoimaging of the fracture surfaces of cementitious nanocomposites reinforced with CNFs at different concentrations has shown that CNFs are able to bridge nanocracks and pores and achieve good bonding with the cement hydration products. As a result, the incorporation of CNFs was shown to improve significantly the flexural strength of the cementitious matrix.Keywords
This publication has 11 references indexed in Scilit:
- Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement compositesComposites Science and Technology, 2009
- Multi-scale Performance and Durability of Carbon Nanofiber/Cement Composites2009
- Nanoscale Modification of Cementitious Materials2009
- Elastic Properties and Morphology of Individual Carbon NanofibersACS Nano, 2008
- Study on mechanical, morphological and electrical properties of carbon nanofiber/polyetherimide compositesMaterials Science and Engineering: B, 2007
- Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solutionCarbon, 2007
- Carbon nanotubes – becoming cleanMaterials Today, 2007
- Dispersion and alignment of carbon nanotubes in polymer matrix: A reviewMaterials Science and Engineering: R: Reports, 2005
- Carbon nanofibers for composite applicationsCarbon, 2004
- Nanofiber‐reinforced polymers prepared by fused deposition modelingJournal of Applied Polymer Science, 2003