Algorithm for ion beam figuring of low-gradient mirrors
Authors:
- 10 July 2009
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (21) , 4090-4096
Abstract
Ion beam figuring technology for low-gradient mirrors is discussed. Ion beam figuring is a noncontact machining technique in which a beam of high-energy ions is directed toward a target workpiece to remove material in a predetermined and controlled fashion. Owing to this noncontact mode of material removal, problems associated with tool wear and edge effects, which are common in conventional contact polishing processes, are avoided. Based on the Bayesian principle, an iterative dwell time algorithm for planar mirrors is deduced from the computer-controlled optical surfacing (CCOS) principle. With the properties of the removal function, the shaping process of low-gradient mirrors can be approximated by the linear model for planar mirrors. With these discussions, the error surface figuring technology for low-gradient mirrors with a linear path is set up. With the near-Gaussian property of the removal function, the figuring process with a spiral path can be described by the conventional linear CCOS principle, and a Bayesian-based iterative algorithm can be used to deconvolute the dwell time. Moreover, the selection criterion of the spiral parameter is given. Ion beam figuring technology with a spiral scan path based on these methods can be used to figure mirrors with non-axis-symmetrical errors. Experiments on SiC chemical vapor deposition planar and Zerodur paraboloid samples are made, and the final surface errors are all below .
Keywords
This publication has 15 references indexed in Scilit:
- Image restoration in astronomy: a Bayesian perspectiveIEEE Signal Processing Magazine, 2001
- Ion beam milling of silicon carbide optical components1994
- Advanced matrix-based algorithm for ion-beam milling of optical components1992
- Final surface error correction of an off-axis aspheric petal by ion figuring1992
- Surface error correction of a Keck 10-m telescope primary mirror segment by ion figuring1992
- An Ion Figuring System For Large Optic Fabrication1989
- Surface Figuring Using Neutral Ion Beams1989
- Neutral Ion Beam Figuring Of Large Optical Surfaces1987
- An iterative technique for the rectification of observed distributionsThe Astronomical Journal, 1974
- Bayesian-Based Iterative Method of Image Restoration*Journal of the Optical Society of America, 1972