Production of Activated Carbon from Waste PET’ Chars
Author:
Open Access
- 18 March 2022
- journal article
- Published by Science Publishing Group in International Journal of Environmental Monitoring and Analysis
- Vol. 10 (2) , 39-44
Abstract
Activated carbon, which is used in many application areas such as gas purification, purification of pollution in water and wastewater, removal of odor and pollution, in the defense industry, in the production of protective clothing and in the health sector, was produced from solid products obtained by waste polyethylene terephthalate (wPET) liquefaction that was carried out under non-catalytic conditions, the reaction time of 15-90 min, and a reaction temperature of 325-425 °C in a batch reactor. The solid products obtained, after grinding, were made in a muffle furnace at 400-700°C in a nitrogen gas atmosphere for 30 min. The solid products obtained in the liquefaction of waste polyethylene terephthalate contain approximately 60% Carbon (C), 4% Hydrogen (H) and 36% Oxygen (O), and are composed of terephthalic acid (C 8 H 6 O 4 ) in crystalline form. According to Brunauer–Emmett–Teller (BET) analysis, BET surface area of 313.05 m 2 g -1 and average pore diameter of 2.71 nm of ZnCl 2 activated carbons were obtained. They have formed largely mesoporous structures. According to Scanning Electron Microscopy (SEM) analysis, it was observed that medium and large porous structures were formed. Produced activated carbons have commercial product potential but there is a need to optimize the process parameters for better results.Keywords
This publication has 20 references indexed in Scilit:
- Synthesis and Application of Granular Activated Carbon from Biomass Waste Materials for Water Treatment: A ReviewJournal of Bioresources and Bioproducts, 2021
- Conventional pyrolysis of Plastic waste for Product recovery and utilization of pyrolytic gases for carbon nanotubes productionEnvironmental Science and Pollution Research, 2020
- Production and applications of activated carbons as adsorbents from olive stonesBiomass Conversion and Biorefinery, 2019
- Chemical Activation of an Activated Carbon Prepared from Coffee ResidueEnergy Procedia, 2014
- Physical and chemical characteristics of activated carbon prepared by pyrolysis of chemically treated date stones and its ability to adsorb organicsPowder Technology, 2012
- Gold recovery from loaded activated carbon using different solventsJournal of the Chinese Institute of Chemical Engineers, 2008
- Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixturesResources, Conservation and Recycling, 2007
- High surface area activated carbon prepared from cassava peel by chemical activationBioresource Technology, 2006
- Activated carbons from lignin: kinetic modeling of the pyrolysis of Kraft lignin activated with phosphoric acidChemical Engineering Journal, 2005
- Surface characterization of polyethyleneterephthalate (PET) based activated carbon and the effect of pH on its adsorption capacity from aqueous phenol and 2,3,4-trichlorophenol solutionsCarbon, 2001