Two‐component modified polyurethane sealant for insulating glass: Design, preparation, and application
- 12 July 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (46) , 48219
Abstract
A new two‐component modified polyurethane (PU) sealant was designed and synthesized for insulating glass. This sealant was designed based on a crosslinked reaction between a p‐chlorophenol‐blocked PU pre‐polymer (Pre‐polymer 2) in Component A and a poly‐functional hyperbranched polyamine polymer (polyamide resin 300#) in Component B. During the synthesis of Pre‐polymer 2, Fourier transform infrared spectral analysis was used to track the process, and the optimal reaction time and temperature were 1.5 h and 80 °C, in the presence of 4, 4′‐diphenylmethane diisocyanate (MDI). Different curing agents also used as deblocking agents were screened and it was found that polyamide resin 300# was a good candidate for the curing reaction. In addition, the low‐temperature curing rate was also improved by using dibutyltin dilaurate (DBTDL) and organobentonite together as a composite catalyst. Finally, the prepared two‐component modified PU sealant for insulating glass was successfully used in an assembly line with good performance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48219.Keywords
This publication has 17 references indexed in Scilit:
- Influence analysis of building types and climate zones on energetic, economic and environmental performances of BCHP systemsApplied Energy, 2011
- Energy policy and standard for built environment in ChinaRenewable Energy, 2005
- Synthesis and deblocking of cardanol‐ and anacardate‐blocked toluene diisocyanatesJournal of Polymer Science Part A: Polymer Chemistry, 2004
- Blocked isocyanates IIIProgress in Organic Coatings, 2001
- Blocked isocyanates III: Part A. Mechanisms and chemistryProgress in Organic Coatings, 1999
- Studies on toluenediisocyanate blocked by benzophenone oximesJournal of Polymer Science Part A: Polymer Chemistry, 1993
- The thermal dissociation of phenol-blocked toluene diisocyanate crosslinkersPolymer, 1993
- Determination of NCO Content of Aromatic IsocyanatesJournal of Cellular Plastics, 1991
- Polymerization and copolymerization of an isocyanate blocking agent. N-(1,1′-dimethyl-3-oxobutyl) acrylamide oxime. Mechanical and thermal propertiesJournal of Polymer Science Part A: Polymer Chemistry, 1987
- New developments in the field of blocked isocyanatesProgress in Organic Coatings, 1981