Slippery Mechanism for Enhancing Separation and Anti-fouling of the Superhydrophobic Membrane in a Water-in-Oil Emulsion: Evaluating Water Adhesion of the Membrane Surface
- 29 June 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (27) , 8312-8323
Abstract
Water removal from water-in-oil emulsions with superhydrophobic microporous membranes is an important industrial process, where the interface property between the membrane and feed becomes critical. Here, superhydrophobic isotactic polypropylene (iPP) microporous membranes with the "lotus effect" and "rose-petal effect" were prepared via utilizing micromolding phase separation, where the former surface exhibited a water contact angle of 153° and a sliding angle of 3.2°, while the latter surface exhibited a water contact angle of 151° and adhesive characteristics. Surface topography and wettability analysis revealed that surface hydrophobicity and water adhesion could be improved by reducing the periodic distance and diameter and increasing the height of the micron-scale structure. When treating both water-in-oil emulsions and water-in-oil emulsions containing BSA pollutants, the iPP membrane with the "lotus effect" was superior to that with the "rose-petal effect" in terms of oil permeate flux, separation efficiency, anti-fouling ability, and recyclability (20 cycles). To explain this phenomenon, a "slippery" mechanism was introduced that correlated the sliding angle to the slippery surface of the iPP membrane with the "lotus effect" and its anti-water adhesion property. This work proposed a theoretical platform for investigating the effect of water adhesion on superhydrophobic membranes in terms of oil-water separation efficiency and anti-fouling ability, thereby providing a definite basis for preparing superhydrophobic membranes with efficient separation and fouling resistance capabilities.Keywords
Funding Information
- Natural Science Foundation of Hebei Province (B2020202004)
This publication has 76 references indexed in Scilit:
- Superhydrophobic and Superoleophilic PVDF Membranes for Effective Separation of Water‐in‐Oil Emulsions with High FluxAdvanced Materials, 2013
- Nano-emulsions: Formation by low-energy methodsCurrent Opinion in Colloid & Interface Science, 2012
- Sliding of Water Droplets on Microstructured Hydrophobic SurfacesLangmuir, 2010
- Review of technologies for oil and gas produced water treatmentJournal of Hazardous Materials, 2009
- Diversity of structure, morphology and wetting of plant surfacesSoft Matter, 2008
- Petal Effect: A Superhydrophobic State with High Adhesive ForceLangmuir, 2008
- Non-adhesive lotus and other hydrophobic materialsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2008
- Preparation of iPP hollow-fiber microporous membranes via thermally induced phase separation with co-solvents of DBP and DOPDesalination, 2006
- Wetting and Self-Cleaning Properties of Artificial Superhydrophobic SurfacesLangmuir, 2005
- Molecular Packing of Lysozyme, Fibrinogen, and Bovine Serum Albumin on Hydrophilic and Hydrophobic Surfaces Studied by Infrared−Visible Sum Frequency Generation and Fluorescence MicroscopyJournal of the American Chemical Society, 2003