Demonstration of a wireless, self-powered, electroacoustic liner system
Authors:
- 1 February 2009
- journal article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 125 (2) , 873-881
Abstract
This paper demonstrates the system operation of a self-powered active liner for the suppression of aircraft engine noise. The fundamental element of the active liner system is an electromechanical Helmholtz resonator (EMHR), which consists of a Helmholtz resonator with one of its rigid walls replaced with a circular piezoceramic composite plate. For this system demonstration, two EMHR elements are used, one for acoustic impedance tuning and one for energy harvesting. The EMHR used for acoustic impedance tuning is shunted with a variable resistive load, while the EMHR used for energy harvesting is shunted to a flyback power converter and storage element. The desired acoustic impedance conditions are determined externally, and wirelessly transmitted to the liner system. The power for the receiver and the impedance tuning circuitry in the liner are supplied by the harvested energy. Tuning of the active liner is demonstrated at three different sound pressure levels (148, 151, and 153dB) in order to show the robustness of the energy harvesting and storage system. An acoustic tuning range of approximately 200Hz is demonstrated for each of the three available power levels.Keywords
This publication has 15 references indexed in Scilit:
- Acoustic energy harvesting using an electromechanical Helmholtz resonatorThe Journal of the Acoustical Society of America, 2008
- A hydrogen leakage detection system using self-powered wireless hydrogen sensor nodesSolid-State Electronics, 2007
- A multiple degree of freedom electromechanical Helmholtz resonatorThe Journal of the Acoustical Society of America, 2007
- Modeling, Fabrication and Performance Measurements of a Piezoelectric Energy Converter for Power Harvesting in Autonomous MicrosystemsIEEE Transactions on Instrumentation and Measurement, 2006
- DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERSIntegrated Ferroelectrics, 2005
- Characterization of a Compliant-Backplate Helmholtz Resonator for An Electromechanical Acoustic LinerInternational Journal of Aeroacoustics, 2002
- Experimental investigations of perforated liners with bias flowThe Journal of the Acoustical Society of America, 1999
- ADAPTIVE-PASSIVE NOISE CONTROL WITH SELF-TUNING HELMHOLTZ RESONATORSJournal of Sound and Vibration, 1997
- A new hybrid passive–active noise absorption systemThe Journal of the Acoustical Society of America, 1997
- An Active Sound Absorber With Porous PlateJournal of Vibration and Acoustics, 1984